dbencivengo Posted July 12, 2019 Posted July 12, 2019 I have an EZRain device and while it works properly I can't see the address for the individual vales anywhere. I could have sworn I used to see them. At some point long ago I added the EZ Rain and renamed the valves to their function. In the device table it has the address as 05.92.EE Where can I recover the individual valve number?
paulbates Posted July 12, 2019 Posted July 12, 2019 All zones have the same insteon ID address, plus a zone number. If you pick a valve in the admin console, and look at the very top of the admin console, under the device name is the address. Its been a while since I used an EZ, but I think there should be a single digit number after the insteon address xx:xx:xx # That should be it. Paul
dbencivengo Posted July 12, 2019 Author Posted July 12, 2019 I understand the address scheme and the zone digit is just not displayed. The six digit Insteon address is displayed and that's it.
MTB Posted July 13, 2019 Posted July 13, 2019 On 7/12/2019 at 12:34 PM, dbencivengo said: I understand the address scheme and the zone digit is just not displayed. The six digit Insteon address is displayed and that's it. Tools -> Generate Topology will create an html file that you can download and view. There, it will show you the Insteon address with the suffix (1-8) indicating the channel number along with the current channel name. 1
Recommended Posts