gviliunas Posted October 15, 2019 Posted October 15, 2019 (edited) I recently upgraded to ISY v5.0.16 and Polyglot 2.2.3 Previously, I had exposed several of my Lifx and Harmony node server nodes via the ISY portal so that I could control these via Alexa. ( e.g. "Alexa, turn on stereo") Now, If I open the Amazon Echo device list in the portal, I can see my previously-configured nodes (See attached example of my page 11) If I click to edit one of these nodes, the My Device field is blank and can't be edited. If I try to add any Node Server-based devices, these are no longer shown in the list of available devices. Devices configured prior to the upgrade can still be controlled by Alexa but new Node Server-based sub-nodes cannot be added. I am not sure which upgrade caused the problem. Edited October 15, 2019 by gviliunas
bmercier Posted October 17, 2019 Posted October 17, 2019 Most likely, the node now has a new type that is no longer recognized.Please post the output of /rest/nodesBenoitSent from my iPhone using Tapatalk
gviliunas Posted October 17, 2019 Author Posted October 17, 2019 Thanks Benoit, Here is the output that you requested. I think that you are onto something. The now non-working nodes all have a type = 0.0.0.0 Thanks for your help! nodes.pdf
Michel Kohanim Posted October 17, 2019 Posted October 17, 2019 Hi @gviliunas, Which node server is this? With kind regards, Michel
gviliunas Posted October 17, 2019 Author Posted October 17, 2019 (edited) Hi Michel, For me, the affected node servers are LiFX v2.1.16 and Harmony Hub v2.2.5 I am using Polyglot v2.2.3 and ISY v5.0.16 Any node with a nxxx_yyyyyyyy address except for the base controller nodes is now not shown in the My Device portal drop down selections. eg. I do have a "LiFX controller (n005_controller)" node in the ISY Portal "My Device" drop down selection but none of the individual LiFX light nodes appear in this drop-down. Previously, these were there and I was able to expose individual LiFX lamps as devices. Edited October 18, 2019 by gviliunas
Michel Kohanim Posted October 18, 2019 Posted October 18, 2019 @gviliunas, Thanks so very much! We will definitely look into it. With kind regards, Michel
gviliunas Posted October 29, 2019 Author Posted October 29, 2019 I had a few minutes so tried restoring a good backup of ISY v. 5.0.15A to rule out either ISY or Polyglot as the cause for this. Restoring the ISY backup did NOT solve the problem so I suspect that the cause for not able to expose the node-server based nodes has something to do with the Polyglot v. 2.2.3 upgrade. Upgrading Polyglot to v. 2.2.4 did not resolve the issue either.
bmercier Posted October 30, 2019 Posted October 30, 2019 12 hours ago, gviliunas said: I had a few minutes so tried restoring a good backup of ISY v. 5.0.15A to rule out either ISY or Polyglot as the cause for this. Restoring the ISY backup did NOT solve the problem so I suspect that the cause for not able to expose the node-server based nodes has something to do with the Polyglot v. 2.2.3 upgrade. Upgrading Polyglot to v. 2.2.4 did not resolve the issue either. I made a change to ISY Portal. Nodes with a hint of 0.0.x.x should now appear as a dimmable light. Can you please test it? Thanks, Benoit 3
gviliunas Posted October 30, 2019 Author Posted October 30, 2019 Thanks Benoit!! Confirmed, yes, the node-server nodes are now present in the drop-down selection and populated once again in the existing portal-exposed nodes. Thanks for your help with this! Greg 1
Michel Kohanim Posted October 30, 2019 Posted October 30, 2019 @bmercier, thank you! You are our super hero. With kind regards, Michel 1
Recommended Posts