andrew77 Posted November 25, 2020 Posted November 25, 2020 I have a few KPLs and it seems I have an issue with a voice command for one. For the load (A button) I cant seem to tell Alexa to turn the light on to a percentage, just on or off. Its registered as a light in the ISY Portal, Alexa's online GUI has it just the same as the other lights. I must be overlooking something but I'm not sure what. Drew
larryllix Posted November 25, 2020 Posted November 25, 2020 (edited) 2 hours ago, andrew77 said: I have a few KPLs and it seems I have an issue with a voice command for one. For the load (A button) I cant seem to tell Alexa to turn the light on to a percentage, just on or off. Its registered as a light in the ISY Portal, Alexa's online GUI has it just the same as the other lights. I must be overlooking something but I'm not sure what. Drew I am in Ontario also and alexa reports "Sorry, something went wrong" with every command right now. My guess is they are actually responding to my suggestions how to fix the ISY Portal responses that trigger Routines and have made a bigger mess of it. UPDATE: My mistake. I swapped two CAO Wireless Tags names today and Alexa didn't like it. I disabled the Tag skill and then re-enabled again and alexa stopped complaining. All is well again. Edited November 25, 2020 by larryllix
MrBill Posted November 25, 2020 Posted November 25, 2020 AWS is having a bad day. Many of Alexa's services aren't working today. Started about 8AM PST, didn't get declared a major event until about 10AM PST. Many services are finally starting to go back to green, a couple of hours ago the status page looked about double worse.
andrew77 Posted November 26, 2020 Author Posted November 26, 2020 I've had this issue for a while now with the KPL. Larry, what's a CAO? Other KPLs can take a command for a percentage, just not this one in particular. Is there something I can do to fix this? (i.e. rediscover or whatnot) Drew
larryllix Posted November 26, 2020 Posted November 26, 2020 (edited) 39 minutes ago, andrew77 said: I've had this issue for a while now with the KPL. Larry, what's a CAO? Other KPLs can take a command for a percentage, just not this one in particular. Is there something I can do to fix this? (i.e. rediscover or whatnot) Drew CAO is a company name that manufactures or distributes these wireless Tags. http://caogadgets.com/ JImbo has created a NS to support them in ISY. They can also be used with other interfacing methods or alone, without ISY at all. Edited November 26, 2020 by larryllix
andrew77 Posted November 27, 2020 Author Posted November 27, 2020 I'll check them out. Does anyone have any suggestions to fix my KPL issue?
andrew77 Posted November 30, 2020 Author Posted November 30, 2020 (edited) Just giving this post a bump. Hoping someone has had this issue or a solution. Should I try to Restore Device? Edited November 30, 2020 by andrew77
andrew77 Posted December 7, 2020 Author Posted December 7, 2020 Just checking to see if anyone had any thoughts on this issue? When I ask this KPL to turn on 30% (or any percentage) Alexa asks "Did you mean Basement Living Room?" When I say yes she just turns it on 100% Every other device (KPLs included) have no problem turning on to any percentage. The lights being controlled are dimmable. As faros I can see theres no difference in the basement KPL set up from any other in the house. Drew
lilyoyo1 Posted December 7, 2020 Posted December 7, 2020 (edited) 2 hours ago, andrew77 said: Just checking to see if anyone had any thoughts on this issue? When I ask this KPL to turn on 30% (or any percentage) Alexa asks "Did you mean Basement Living Room?" When I say yes she just turns it on 100% Every other device (KPLs included) have no problem turning on to any percentage. The lights being controlled are dimmable. As faros I can see theres no difference in the basement KPL set up from any other in the house. Drew Most likely it's getting confused with the name which throws things off. Try naming it something outside of anything you're using to see if that works. As long as devices are setup properly in the ISY and portal, most issues will come down to the name. If something isn't working properly, I would ensure its the actual device (and not a scene) and try calling it something outside of what you're currently using Edited December 7, 2020 by lilyoyo1 1
andrew77 Posted December 7, 2020 Author Posted December 7, 2020 55 minutes ago, lilyoyo1 said: Most likely it's getting confused with the name which throws things off. Try naming it something outside of anything you're using to see if that works. As long as devices are setup properly in the ISY and portal, most issues will come down to the name. If something isn't working properly, I would ensure its the actual device (and not a scene) and try calling it something outside of what you're currently using This worked great when I called it Skywalker. Is it too many scenes/devices/etc with the word Basement in the name? Is there a fix for this or do I have to 'turn on Skywalker' for the rest of eternity?
lilyoyo1 Posted December 7, 2020 Posted December 7, 2020 1 hour ago, andrew77 said: This worked great when I called it Skywalker. Is it too many scenes/devices/etc with the word Basement in the name? Is there a fix for this or do I have to 'turn on Skywalker' for the rest of eternity? Outside of what I previously told you, no. If it's a ceiling light, you could call it that and and it to the room as ceiling. Then you would simply say turn off the ceiling or whatever you want
Recommended Posts