jds31 Posted December 13, 2020 Posted December 13, 2020 Running 5.2 on ISY and console. This also happened with 5.16. If I go into link mode and do not have a device to detect, the link mode times out and the finish box is displayed. When I press finish the linking process status is displayed again. It cannot be closed. When it reaches 100% it starts over again. It will go on forever. The ISY stops executing programs and will not send on/off commands to devices. The fix is to power off the ISY and let it boot up. Standard fix for computers. Just annoying. I can prevent the problem by having a device to link. Might just be an undocumented feature. I saw a report of this problem from last January. His fix was to update to current software which probably also interrupted the process. Jim
larryllix Posted December 13, 2020 Posted December 13, 2020 2 hours ago, jds31 said: Running 5.2 on ISY and console. This also happened with 5.16. If I go into link mode and do not have a device to detect, the link mode times out and the finish box is displayed. When I press finish the linking process status is displayed again. It cannot be closed. When it reaches 100% it starts over again. It will go on forever. The ISY stops executing programs and will not send on/off commands to devices. The fix is to power off the ISY and let it boot up. Standard fix for computers. Just annoying. I can prevent the problem by having a device to link. Might just be an undocumented feature. I saw a report of this problem from last January. His fix was to update to current software which probably also interrupted the process. Jim @Michel Kohanimshould be notified of this for investigation. I just did.
Recommended Posts