Jgdavis14 Posted March 17, 2021 Posted March 17, 2021 I had an electrical spike and one of my outlets died. I've been trying to install an OutletLink Dimmer that I purchased several years ago. Tried various ways to install it but keep getting the attached message. Any idea what this means.
smacbride Posted March 17, 2021 Posted March 17, 2021 Are you manually typing in the address? This happened to me and I had written down the address wrong... Took awhile to figure out that I was typing in the wrong address.
Jgdavis14 Posted March 17, 2021 Author Posted March 17, 2021 Good thouht...but I took a picture of it before I put the switch plate back on and it's good. Wish it were that esay.
lilyoyo1 Posted March 17, 2021 Posted March 17, 2021 Did you try start linking and use the set button on the outlet
Jgdavis14 Posted March 18, 2021 Author Posted March 18, 2021 Yes, that did get the outlet installed. However, have had multiple issues of it not working. Plug a lamp in, with the little magnet, it buzzes and the red light flashes. Unfortunately, I am leaving for 3 days and won't be able to play with this until I return.
Brian H Posted March 18, 2021 Posted March 18, 2021 Does the lamp have an incandescent or dimmable LED bulb? The lamp you used should not have a built in dimmer switch, high-low switch built in or low voltage bulb with a built in power supply. 2
Recommended Posts