swamp2 Posted April 7, 2021 Posted April 7, 2021 Hi, having some difficulty here. This is not working anything like my GE 240V Outdoor Smart Switch for the pool pump (which provides a lot of data right out of the box). All I see in the ISY Admin screen for the Energy Monitor is the attached and it is not dynamic. Is there some manual setup required? Thanks much.
Michel Kohanim Posted April 8, 2021 Posted April 8, 2021 @swamp2, Most of these devices have user defined parameters for polling and other aspects of the operation. You need to look at the user manual. With kind regards, Michel
swamp2 Posted April 8, 2021 Author Posted April 8, 2021 Some extensive Google-Fu did not yield any manual covering this topic. I called Honeywell and since this is a "Pro" item I was referred to my contractor/installer for support. Well he is a complete idiot, unfortunately... There must be some Pro documentation for this unit somewhere.
swamp2 Posted April 15, 2021 Author Posted April 15, 2021 Bump. Someone has to have figured this out... Thanks.
MrBill Posted April 15, 2021 Posted April 15, 2021 in a single google attempt, second link clicked I found this manual. On page 20 it says: Quote Z-Wave configuration parameters If your gateway/hub/controller supports configuration function, you may remotely configure or change the default thermostat configuration parameters. For detailed table with all available Z-Wave configuration parameters go tohttp://customer.honeywell.com or search for T6 Pro Z-Wave Thermostat in the Z-Wave certified products section onhttp://Z-Wavealliance.org Read more: https://www.alarmgrid.com/documents/honeywell-t6-pro-z-wave-thermostat-installation-manual I wouldn't necessarily assume someone from this community has that thermostat either.
swamp2 Posted April 15, 2021 Author Posted April 15, 2021 1 hour ago, MrBill said: in a single google attempt, second link clicked I found this manual. On page 20 it says: I wouldn't necessarily assume someone from this community has that thermostat either. Thanks. Both complete dead ends. Absolutely nothing shows up at Z-Wavealliance.org and there are hits for this model from Honeywell but no manuals or documentation that help.
MrBill Posted April 15, 2021 Posted April 15, 2021 13 minutes ago, swamp2 said: Thanks. Both complete dead ends. Absolutely nothing shows up at Z-Wavealliance.org and there are hits for this model from Honeywell but no manuals or documentation that help. hmmmm, i didn't have trouble.... https://products.z-wavealliance.org/regions/2/categories/10/products?company=731 https://products.z-wavealliance.org/products/2893 https://products.z-wavealliance.org/products/2583?selectedFrequencyId=2 1
lilyoyo1 Posted April 15, 2021 Posted April 15, 2021 1 hour ago, MrBill said: hmmmm, i didn't have trouble.... Damn Google and their invisible pages 1
swamp2 Posted April 16, 2021 Author Posted April 16, 2021 8 hours ago, MrBill said: hmmmm, i didn't have trouble.... https://products.z-wavealliance.org/regions/2/categories/10/products?company=731 https://products.z-wavealliance.org/products/2893 https://products.z-wavealliance.org/products/2583?selectedFrequencyId=2 Thanks much. I missed the Products>Catalog of Certified Products links needed before doing a search. Absolutely nil in those manuals, list, links on monitoring power consumption. I dug through all lines for the "Command Classes" and "Configuration Parameters". I'm beginning to think that even though when I linked to this thermostat and a separate "energy meter" Z-wave "device" showed up in my ISY menu, that this is not actually available.
Recommended Posts