smiley73 Posted December 4, 2009 Posted December 4, 2009 Hi, I just replaced a device via the replace function, but my programs did not get corrected. I had to go through all programs and replace the with the correct device. ISY-99I/IR Pro v2.7.7 Heiko Quote
Michel Kohanim Posted December 4, 2009 Posted December 4, 2009 Hello Heiko, Unfortunately that's the limitation of the firmware at this point ... it's on the list to be enhanced. What you can do is to use the Find/Replace function in the programs to look for Not Specified and then replace them with your new device. With kind regards, Michel Quote
smiley73 Posted December 4, 2009 Author Posted December 4, 2009 Michel, thanks for the update. What you can do is to use the Find/Replace function in the programs to look for Not Specified and then replace them with your new device. Unfortunately this doesn't work either. If I select 'Raw Text', then there's no 'Replace with' available. There was no 'not specified' available when I chose the type 'Insteon'. In addition to that, simply selecting the correct device didn't help either. As soon as I change it (manually) from 'not specified' to the correct device, the action (i.e. setting heat setpoint to 72) is lost (in this case it defaulted back to 'query') and I had to set everything again. My ISY is already configured correctly again, but you may get a flood of complains once folks start replacing their thermostat adapter with the v2.0. Heiko Quote
Michel Kohanim Posted December 4, 2009 Posted December 4, 2009 Hi Heiko, Thanks so very much. We will get right on it. With kind regards, Michel Michel, thanks for the update. What you can do is to use the Find/Replace function in the programs to look for Not Specified and then replace them with your new device. Unfortunately this doesn't work either. If I select 'Raw Text', then there's no 'Replace with' available. There was no 'not specified' available when I chose the type 'Insteon'. In addition to that, simply selecting the correct device didn't help either. As soon as I change it (manually) from 'not specified' to the correct device, the action (i.e. setting heat setpoint to 72) is lost (in this case it defaulted back to 'query') and I had to set everything again. My ISY is already configured correctly again, but you may get a flood of complains once folks start replacing their thermostat adapter with the v2.0. Heiko Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.