e40 Posted October 13, 2021 Posted October 13, 2021 Hello, I bought a couple of these range extenders, and I can get them added to the ISY 5.3.4 without issue, but they are not connecting in the secure mode. I have tried the 'double tap' when pairing, but according to the node info they are connecting non secure. I've excluded the device, factory reset, tried many times over and still get to the same place. (security=none with both extenders) Any tips or tricks for this? Thanks, Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ---------------------------------------------- Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ZW 040 Repeater Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ZW040_1 uid=40 security=None type=4.15.1 mid=881 tid=260 pid=189 Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x5E V2 ZWAVEPLUS_INFO Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x85 V2 ASSOCIATION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x8E V3 MULTI_CHANNEL_ASSOCIATION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x59 V3 ASSOCIATION_GROUP_INFO Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x55 V2 TRANSPORT_SERVICE Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x86 V3 VERSION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x72 V2 MANUFACTURER_SPECIFIC Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x5A V1 DEVICE_RESET_LOCALLY Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x87 V3 INDICATOR Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x73 V1 POWERLEVEL Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x9F V1 SECURITY_2 Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x6C V1 SUPERVISION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x7A V5 FIRMWARE_UPDATE_MD Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - Secure Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ----------------------------------------------
lilyoyo1 Posted October 13, 2021 Posted October 13, 2021 52 minutes ago, e40 said: Hello, I bought a couple of these range extenders, and I can get them added to the ISY 5.3.4 without issue, but they are not connecting in the secure mode. I have tried the 'double tap' when pairing, but according to the node info they are connecting non secure. I've excluded the device, factory reset, tried many times over and still get to the same place. (security=none with both extenders) Any tips or tricks for this? Thanks, Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ---------------------------------------------- Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ZW 040 Repeater Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ZW040_1 uid=40 security=None type=4.15.1 mid=881 tid=260 pid=189 Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x5E V2 ZWAVEPLUS_INFO Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x85 V2 ASSOCIATION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x8E V3 MULTI_CHANNEL_ASSOCIATION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x59 V3 ASSOCIATION_GROUP_INFO Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x55 V2 TRANSPORT_SERVICE Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x86 V3 VERSION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x72 V2 MANUFACTURER_SPECIFIC Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x5A V1 DEVICE_RESET_LOCALLY Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x87 V3 INDICATOR Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x73 V1 POWERLEVEL Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x9F V1 SECURITY_2 Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x6C V1 SUPERVISION Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - x7A V5 FIRMWARE_UPDATE_MD Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] - Secure Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] Wed 10/13/2021 03:44:34 PM : [ZW-SHOW ] ---------------------------------------------- ISY doesn't support s2 encryption at this time. Is there any reason you want it in secure mode?
e40 Posted October 13, 2021 Author Posted October 13, 2021 I am trying to get reliable status updates from my BE469 Schlage locks to the ISY. The one close to the ISY will report reliably off the Access Control node (manual lock, unlock, user number, etc) But the one at my front door, far from the ISY, does not report anything from Access Control, but it will report lock/unlocked. (Albeit, slow, and sometimes won't report a change at all) I bought the RE7's based on some other threads I was reading. And while I believe it's helped with my distant Schlage lock, it's still not 100%. (And, adding to Z-Wave 'secured' was the path I was looking toward) Maybe I'm not on the right path.. hmm.
lilyoyo1 Posted October 14, 2021 Posted October 14, 2021 Secure doesn't help with making things more reliable. Having a strong mesh network is what makes communication more reliable. With that said schlage is notoriously finicky with pretty much all systems
e40 Posted October 14, 2021 Author Posted October 14, 2021 (edited) OK, sounds about right. I've got about 25 Z-wave devices, so the Schlage's have plenty of company. I have two extenders installed, about 5' line of site from the Schlages, but only the one close to the ISY is reliable. I don't remember as much trouble on the older pre-5.0 ISY firmware. EDIT / Update : Ahh. So, turns out that I have a BE469 with firmware 8.0, and a BE469ZP with firmware 10.9. The older one was the one farthest from the ISY and slow to report. So I switched them around, putting the older device close to the ISY, and it's much better. Edited October 14, 2021 by e40 update
Recommended Posts