GJ Software Products Posted May 17, 2022 Posted May 17, 2022 Has anyone out there integrated a (few) Zooz 700 Series ZSE42 Water Leak Detectors into an ISY994i with a 500 Series dongle in it? Does it work? Overall what do you think of it? How did the integration go, fairly simple? What comments may you offer? Thanks.
GJ Software Products Posted May 21, 2022 Author Posted May 21, 2022 I went ahead and bought one to test, it worked, so I got 5 more and now have 6 integrated. They all appear to be working but it was a bit strange on the first functional test, 3 out of the 6 I had to trigger twice to get the state change and it too adds a couple more nodes that don't come in when you Include the device. Had a feeling like the device wasn't awake but the blue LED was flashing. Then the last 3 worked first time. I'm no Z-Wave guru at all, since Insteon went down I've been moving to Z-Wave but a lot to still learn/understand. I'm thinking let them run for a few days, maybe some self-healing - re-routing will happen, and I'll Functional Test again.
gages97 Posted May 22, 2022 Posted May 22, 2022 Just added one on Friday - super simple, group the devices, makes it simpler to view. I also add an alert in case battery level gets <20%.
sjenkins Posted June 5, 2022 Posted June 5, 2022 I have about 20 leak sensors half Insteon half z-wave most are these zooz and then a couple of the homeseer units. All work well after a few months together on the IOP, never tried these on my now dormant 994
captainc Posted June 14, 2022 Posted June 14, 2022 On 5/21/2022 at 2:33 PM, GJ Software Products said: I went ahead and bought one to test, it worked, so I got 5 more and now have 6 integrated. They all appear to be working but it was a bit strange on the first functional test, 3 out of the 6 I had to trigger twice to get the state change and it too adds a couple more nodes that don't come in when you Include the device. Had a feeling like the device wasn't awake but the blue LED was flashing. Then the last 3 worked first time. I'm no Z-Wave guru at all, since Insteon went down I've been moving to Z-Wave but a lot to still learn/understand. I'm thinking let them run for a few days, maybe some self-healing - re-routing will happen, and I'll Functional Test again. Some of the Z wave switches I have been putting in have "Basic Scenes" when they are added. Also not a guru I don't know what they do and why some of the same switches do it and others don't but they work.
Recommended Posts