NJ_Mark Posted February 12, 2010 Share Posted February 12, 2010 I have a KPL in my guest bath (6 Button). I have a scene setup on button C called nightlight that turns on the load (a light) at 20%. The local level on the Load Button itself it 100%. If the light is off pressing C will turn on the light at 20%. If the light it on it will dim to 20%. Press the load ON button will either turn the light on full if off, or bring it up to full from 20%. This has worked fine for over a year. Now tonight I hit the load ON button and the light turned on at 20% not 100% as expected. Button C still performs as expected. I checked the ISY and the local on level for the KPL load is still listed at 100%. What's up? I am on version 2.7.10 firmware. I upgraded a week or so ago and this light was functioning fine until tonight. I was able to fix the action of the load button by changing the local on rat to 90% then back to 100%. I'm just trying to figure what happened. Quote Link to comment
Michel Kohanim Posted February 12, 2010 Share Posted February 12, 2010 NJ_Mark, If everything worked fine in 2.7.10 then I must suspect something changing the local load on your KPL without going through ISY. Is this a possibility? With kind regards, Michel Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.