FerventGeek Posted December 5, 2022 Posted December 5, 2022 I've tried rebooting and restarting and updating and all the things, but still see mismatching version numbers in Polisy. Is there magic for this? (Getting ready to move to the Zmatter card). Thx.
Solution Michel Kohanim Posted December 5, 2022 Solution Posted December 5, 2022 @FerventGeek, It's probably not connected to IoX. Please follow these instructions: https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide#ISYs With kind regards, Michel 1
brians Posted December 5, 2022 Posted December 5, 2022 @FerventGeekRegarding your other posts recently, you state that are migrating to Polisy but don't have a PLM cable. It seems that based on the version 5.3.4 you are probably still connected to your ISY994i. 2
FerventGeek Posted December 5, 2022 Author Posted December 5, 2022 10 minutes ago, Michel Kohanim said: @FerventGeek, It's probably not connected to IoX. Please follow these instructions: https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide#ISYs With kind regards, Michel Ahhh.. That's the value coming from the ISY99 via {host}/desc, not the local IoP server. Thx Michel. 2
FerventGeek Posted December 5, 2022 Author Posted December 5, 2022 1 minute ago, brians said: @FerventGeekRegarding your other posts recently, you state that are migrating to Polisy but don't have a PLM cable. It seems that based on the version 5.3.4 you are probably still connected to your ISY994i. Correct. I have the adapter ready, and am checking all the dependencies. It's a simultaneous zmatter install -> migration, so I'm checking everything I can beforehand.
Recommended Posts