In MobileLinc Pro there is a nice feature that allows you to map a status to another word

As an example for an IOLink

• if set to On, show as Closed
• if set to Off, show as Open

Any way to do that w/ UD Mobile?

You mean like this?

 

awesome, will review.

Ya I just started doing more with UD Mobile here is example of sorta what you want.

I even made my home screen folder display different status of everything if a light is on in a room it shows Yellow and displays On. In particular, if garage door is open/closed and lights on/off the room folder changes color of door appropriately. If I open the door with light on I make it sorta orange color and if open and no light on it is red (not shown).

 

Then I also monitor my septic lift pump, it displays status of a couple leak sensors labelled OK, and will turn red and say Leak. Also if pump is running and how many times it ran today.

Edited January 5, 20232 yr by brians

I got the basics working, TY.  When I rearrange the icons I can't seem to have 2 icons in a row, only 3.  I want to get to something like the attached.  But it will only let me do this

Edited January 5, 20232 yr by gages97

I figured it out.  You create some blanks by adding and setting icon to empty.  Then move things around

5 hours ago, gages97 said:

I figured it out.  You create some blanks by adding and setting icon to empty.  Then move things around

Or you can change the SPAN from default to 2 or 3. See my example below for security. UD mobile is extremely powerful once you figure it out. you can have your own custom names for displays, you can have one device be the display, but a program or other device be the action when pressed. very versatile. 

Here is an example, of three. 

Ahh, so that is what Span means....