jcip Posted March 9, 2010 Posted March 9, 2010 I am using four new thermostats and ISY 99i v 2.7.9 the new thermostat controller monitors the state of the main unit as well as the cool control, fan control, and the heat control (as separate controls). for some reason, certain thermostat fan controls read "ON" at the specific control level even though the fan is off. at the main control level, the fan control is set to "AUTO". to temporarily resolve the issue, i remove the module from my ISY, add it back, and it resolves for some period of time... but then it happens again within a few days.
Michel Kohanim Posted March 9, 2010 Posted March 9, 2010 Hello jcip, The first thing I recommend is to upgrade to 2.7.12. Please note that the fan mode/state changes have a little issue in thermostats: if you turn the fan on/off quickly enough, the thermostat dongle may get confused and from then on provide you with the wrong status. With kind regards, Michel
jcip Posted March 9, 2010 Author Posted March 9, 2010 Where do I find a download of the latest firmware?
Sub-Routine Posted March 9, 2010 Posted March 9, 2010 Fixes in Next Drop (2.7.12 BETA) Where do I find a download of the latest firmware?
Recommended Posts