awysocki Posted January 14, 2023 Posted January 14, 2023 My units at home so I couldn't look and I didn't find the power requirements on the UD web site tech notes. I've had couple of brown outs lately. Looking at some Plugged in Power banks. (eg: https://www.anker.com/products/a1621?variant=37437690052758 ) They both charge and provide battery power. Not knowing the power requirements of the eISY I don't want to underpower the power bank. I think this would be a smaller option than a full blow Uninterruptable power supply. A 10 minute option is all I'm looking for. What wattage on the USB C power cord does eISY require? Thanks Andy
JTsao Posted January 14, 2023 Posted January 14, 2023 Isn't the eISY 12V/2A? I use this with the Polisy and plan to move it to the eISY but I'll need a DC to USB C cable to do so... https://a.co/d/hy7RXnr
awysocki Posted January 14, 2023 Author Posted January 14, 2023 33 minutes ago, JTsao said: Isn't the eISY 12V/2A? I use this with the Polisy and plan to move it to the eISY but I'll need a DC to USB C cable to do so... https://a.co/d/hy7RXnr My eISY has a USB C connector that supplies power. I don't remember if there is a 12V connector, on it
Solution AllDigital Posted January 14, 2023 Solution Posted January 14, 2023 The stock wall adapter shipped with my EISY is 12vdc 2.0A (24W)
DennisC Posted January 15, 2023 Posted January 15, 2023 I think you would be better off picking up a small UPS at a place like Costco. They are still inexpensive and you get the benefit of power filtering. However, if you're using Insteon, don't plug the PLM in to it.
awysocki Posted January 15, 2023 Author Posted January 15, 2023 8 hours ago, DennisC said: I think you would be better off picking up a small UPS at a place like Costco. They are still inexpensive and you get the benefit of power filtering. However, if you're using Insteon, don't plug the PLM in to it. Yes, a small UPS is less expensive, but its a space issue I'm trying to solve. So the UPS's I have found are too big for where I want my unit to go. Thanks
matapan Posted January 15, 2023 Posted January 15, 2023 19 minutes ago, awysocki said: Yes, a small UPS is less expensive, but its a space issue I'm trying to solve. So the UPS's I have found are too big for where I want my unit to go. Thanks When using a UPS, is it a good idea to plug the UPS into a Filterlinc? This is presuming that the modem is not plugged into the UPS, but the eISY's power supply is. 1
Brian H Posted January 15, 2023 Posted January 15, 2023 (edited) 8 hours ago, DennisC said: I think you would be better off picking up a small UPS at a place like Costco. They are still inexpensive and you get the benefit of power filtering. However, if you're using Insteon, don't plug the PLM in to it. The UPS power filtering can absorb the power line commands from a PLM. Many also don't have a true sine wave AC output. That many power supplies don't run with. No UPS on a PLM is a very good recommendation. FilterLinc sound like a good way to go. That is how mine is. PLM in the unfiltered outlet on the front. Computer equipment on the filtered outlet. Edited January 15, 2023 by Brian H Add information.
Recommended Posts