SHM Posted February 2, 2023 Posted February 2, 2023 Just upgraded successfully to 5.5.5. What z wave speed setting is recommended for Z-wave plus door locks and earlier version Z wave locks (e.g., schlage or baldwin)
lilyoyo1 Posted February 3, 2023 Posted February 3, 2023 On 2/2/2023 at 9:27 PM, SHM said: Just upgraded successfully to 5.5.5. What z wave speed setting is recommended for Z-wave plus door locks and earlier version Z wave locks (e.g., schlage or baldwin) Expand What do you mean by speed setting
gzahar Posted February 3, 2023 Posted February 3, 2023 On 2/3/2023 at 12:54 AM, lilyoyo1 said: What do you mean by speed setting There’s now a communications speed setting in the Zwave menu.
sjenkins Posted February 3, 2023 Posted February 3, 2023 It actually sets a delay between commands as opposed to truly speed. The release notes say it may be useful for older devices or those struggling to be interviewed properly. I am thinking of trying it on a device or two which are not completing interview. I would likely try to move it back to default after that though as all my devices are talking ok outside of interview.
SHM Posted February 3, 2023 Author Posted February 3, 2023 I tried different network speed settings for my 2016 vintage Schlage lock (not Z wave plus) as it will not add to the network, I assume this is because the wave card in the lock is the 300 series and Z matter cannot communicate with it. Setting the network speed faster or slower did not make a difference. My Baldwin lock is Z wave 500 series and Z matter sees it without problem. I was just hoping that changing the network speed setting would allow Z matter to communicate with the Schlage, but I guess not.
sjenkins Posted February 3, 2023 Posted February 3, 2023 I appreciate that UD is giving us one more knob to tryout as we all figure these devices out.
hart2hart Posted February 3, 2023 Posted February 3, 2023 On 2/3/2023 at 5:26 PM, SHM said: I tried different network speed settings for my 2016 vintage Schlage lock (not Z wave plus) as it will not add to the network, I assume this is because the wave card in the lock is the 300 series and Z matter cannot communicate with it. Setting the network speed faster or slower did not make a difference. My Baldwin lock is Z wave 500 series and Z matter sees it without problem. I was just hoping that changing the network speed setting would allow Z matter to communicate with the Schlage, but I guess not.I’ve got 2 of those locks. Did you have a UD 500 series zwave board in ISY994 and migrate it to EISY or a 300 series zwave and reset and add to EISY?
SHM Posted February 4, 2023 Author Posted February 4, 2023 I had a Zooz stick in my 994 then migrated to polisy with Zmatter
lilyoyo1 Posted February 4, 2023 Posted February 4, 2023 On 2/4/2023 at 6:54 PM, SHM said: I had a Zooz stick in my 994 then migrated to polisy with Zmatter Expand Howd you accomplish that? Do you mean you used zooz with your polisy?
hart2hart Posted February 5, 2023 Posted February 5, 2023 On 2/5/2023 at 12:09 AM, SHM said: Yes, when I was still using the 994Sorry, I’m confused. How did you access zwave devices in the ISY994 if the zooz stick was in the Polisy?
lilyoyo1 Posted February 5, 2023 Posted February 5, 2023 On 2/5/2023 at 12:09 AM, SHM said: Yes, when I was still using the 994 Expand How? Zooz stick isnt compatible with the ISY
SHM Posted February 5, 2023 Author Posted February 5, 2023 Sorry, I meant to say that after migrating to IoX on Polisy, I had a Zooz stick for the polisy. After upgrading the stick to ZMatter, I can no longer add the older Schlage lock (wave 300) to the network. I thought the network speed setting in 5.5.5 might allow me to add this lock.
hart2hart Posted February 5, 2023 Posted February 5, 2023 On 2/5/2023 at 7:27 PM, SHM said: Sorry, I meant to say that after migrating to IoX on Polisy, I had a Zooz stick for the polisy. After upgrading the stick to ZMatter, I can no longer add the older Schlage lock (wave 300) to the network. I thought the network speed setting in 5.5.5 might allow me to add this lock.Thanks, and understand. In your ISY, did you have a 500 or 300 series zwave board?
SHM Posted February 6, 2023 Author Posted February 6, 2023 Its a ZW/IR Pro so I think it has a 500 board.
lilyoyo1 Posted February 6, 2023 Posted February 6, 2023 On 2/6/2023 at 5:27 PM, SHM said: Its a ZW/IR Pro so I think it has a 500 board. Expand Ir pro doesn't infer 500 series. Did your board have a light on the back of it? What firmware was your isy running
SHM Posted February 7, 2023 Author Posted February 7, 2023 Light yes. It was always the latest firmware
Recommended Posts