bgrubb1 Posted February 7, 2023 Share Posted February 7, 2023 I installed Envisalink HW last Saturday on PG3 everything worked flawlessly. Yesterday the PG3 Node Server threw a cant connect to envisalink at 192.168.1.155 (the reserved address) I can ping it, and I can login to it at that address with browser / password is default Tried removing the Node Server and re-installing, same failure I can see alarm from the app It may have been when I upgraded to 5.5.5 on IOX Polisy with Zmatter Any other ideas ?? log attached ...Barry EnvisaLink-HW_2-7-2023_35933-PM.zip Link to comment
Goose66 Posted February 8, 2023 Share Posted February 8, 2023 There are changes in Polyglot on eISY in regard to permissions. This could have something to do with it. Also make sure your Polisy is completely shutdown because only one connection to the EnvisaLink is allowed. Also, you can’t run NodeLink and the node server at the same time either. Link to comment
SteveT Posted February 8, 2023 Share Posted February 8, 2023 @Goose66 - I am about to make this jump to polisy from a RPI - what is NodeLink? thanks, Steve Link to comment
bgrubb1 Posted February 8, 2023 Author Share Posted February 8, 2023 I am on Polisy not Eisy have rebooted no change Do not run Nodelink does anyone have the ability to test on 5.5.5 ? ...Barry Link to comment
Goose66 Posted February 8, 2023 Share Posted February 8, 2023 I haven’t upgraded to 5.5.5 yet. Link to comment
bgrubb1 Posted February 8, 2023 Author Share Posted February 8, 2023 well I would restore to 5.5.4 but suspect its something in the packages Link to comment
Solution Goose66 Posted February 8, 2023 Solution Share Posted February 8, 2023 The "connection reset by peer" error in the log is what normally occurs when there is another process connected to the EnvisaLink. You mentioned that you can access the EnvisaLink's web-based configuration page? Try using that to reboot the EnvisaLink then restart the node server. Link to comment
bgrubb1 Posted February 8, 2023 Author Share Posted February 8, 2023 bingo all good again tu Link to comment
Geddy Posted February 8, 2023 Share Posted February 8, 2023 11 hours ago, SteveT said: what is NodeLink? https://forum.universal-devices.com/forum/113-nodelink/ A 3rd party development by @io_guy. Link to comment
Recommended Posts