andrewherman Posted March 17, 2023 Share Posted March 17, 2023 Now using eisy, no issues with software, etc. However, for the last couple of weeks, my lamplinc dimmers have been intermittently unresponsive. Running 5.5.9. Scheduling, all other items, seem OK. Now my PLM is about 8-10 years old? Could it be getting weak? I've tried replacing the lamplincs with new, still have the same issue. Hopefully, new PLM will be in stock soon. Any ideas appreciated. Thanks, Andrew Link to comment
Techman Posted March 17, 2023 Share Posted March 17, 2023 It might be your PLM or it could be a communication issue between the PLM and your device(s) Here's some communication troubleshooting tips: INSTEON Signal / Noise Troubleshooting - Universal Devices, Inc. Wiki (universal-devices.com) Link to comment
andrewherman Posted March 18, 2023 Author Share Posted March 18, 2023 Thanks. Also noticed this when accessing one of the lamp modules from UD Mobile. I appreciate the help. Link to comment
Javi Posted March 19, 2023 Share Posted March 19, 2023 If the issue is only on a select number of devices, then it is likely an issue of communication from PLM to Device. Try to restore the devices or factory reset the device then include. If the issue is with all devices then it's likely PLM issue. Link to comment
andrewherman Posted March 19, 2023 Author Share Posted March 19, 2023 It is not all the devices. I will try to restore and see what happens. Some are older devices. Thanks.... Link to comment
Recommended Posts