DwayneA Posted May 10, 2023 Posted May 10, 2023 This is probably so simple y'all will roll your eyes, however I cannot sort this out. I have an ISY994i (yes I know it's old, but it works well, LIKE REALLY WELL, and I don't need additional features.) I also have several Insteon outdoor on/off modules (2634-222) and six-button dimmer keypads (2334-232). I have created scenes in ISY to link keypad buttons to the outdoor modules. Works great. I've also created If-Then-Else scripts in the ISY to control the outdoor modules under specific conditions. Those scripts function as expected, but the associated keypad buttons do not light or un-light to show status of the outdoor module. What am I missing? Thx for any and all help. Dwayne A
Javi Posted May 10, 2023 Posted May 10, 2023 In the program are you controlling the Scene or the KPL button? Due to Insteon limitations Keypad Link buttons can only be changed by a scene, not a direct command.
DwayneA Posted May 10, 2023 Author Posted May 10, 2023 Hi Javi. In the program I am controlling the outdoor module. I tried controlling the scene but it appeared to not work. D
MrBill Posted May 10, 2023 Posted May 10, 2023 57 minutes ago, DwayneA said: What am I missing? Turn the scene On/Off Instead of the modules themselves. Scenes appear after modules in the Your Devices list: The icon is reflective of the listed item being a scene.
DwayneA Posted May 10, 2023 Author Posted May 10, 2023 ah, ah ah.... But I was using 'Adjust Scene'. I should try Insteon/[Scene] On or Off instead, right?
MrBill Posted May 10, 2023 Posted May 10, 2023 1 minute ago, DwayneA said: I tried controlling the scene but it appeared to not work. Does the scene on/off button in the admin console work?
MrBill Posted May 10, 2023 Posted May 10, 2023 Just now, DwayneA said: ah, ah ah.... But I was using 'Adjust Scene'. I should try Insteon/[Scene] On or Off instead, right? 'Adjust Scene'. is something else entirely... it adjust the values saved in the scene... Now that you know not to use it for this, check you scene to see if it's configured as expected because "Adjust Scene" adjust the values stored with in the scene.
DwayneA Posted May 10, 2023 Author Posted May 10, 2023 Right! Got that now and works perfect! Thx for the quick direction MrBill and Javi. D 2
Recommended Posts