CopyRon Posted September 14, 2023 Posted September 14, 2023 Updated to 5.7 and lost communication to keypadlinc and miniremote. All efforts to restore have failed. Deleted keypad (8 button) and can not add back - insteon engine not found Some help please, this is at work where I depend on these lights. Also lost all communication with Google and can't get z-wave to work in a scene.
Techman Posted September 14, 2023 Posted September 14, 2023 Insteon engine not found means that the PLM is unable to communicate with the device. Is the green led lit on your PLM? Are you able to communicate with other Insteon devices? When you updated to 5.7.0 did you clear your java cache, including checking the box "installed applications" and then download the (new) IoX Launcher from here: https://isy.universal-devices.com/start.jnlp 1
CopyRon Posted September 14, 2023 Author Posted September 14, 2023 8 minutes ago, Techman said: Insteon engine not found means that the PLM is unable to communicate with the device. Is the green led lit on your PLM? Are you able to communicate with other Insteon devices? When you updated to 5.7.0 did you clear your java cache, including checking the box "installed applications" and then download the (new) IoX Launcher from here: https://isy.universal-devices.com/start.jnlp Light is not lit, ordered a new one
Techman Posted September 14, 2023 Posted September 14, 2023 The PLM power supply most likely failed. This is somewhat typical on the older PLMs. The newer PLMs have improved components, and updated firmware. 2
Brian H Posted September 14, 2023 Posted September 14, 2023 It does look like the PLM power supply has failed. Some of us have rebuilt ours but a brand new one will have all the latest components and RS232 signal lines having some protection. 1
Recommended Posts