LFMc Posted January 13 Share Posted January 13 (edited) Oncor updated my meter which knocked off my two HAN devices (Smartenit ZOE Range Extender and ISY ZS). I notified them and they acknowledged that I am grandfathered in, it should not have happened and have assigned me an engineer to rectify the situation. He has been extremely responsive. Currently, we can get the Smartenit ZOE-RE to join the meter with no problem. But, the ISY keeps trying over and over to rejoin with no success and I have located it about 3 feet from the meter to be sure. They have removed and added it several times and I've sent them all my info so they can verify it. Is there anything else I can do from my My Electricity Dashboard to possibly get the ISY to join? My ISY and dashboard are currently on version 5.3.0. Of course I have rebooted many times, but no joy. Any suggestions would be appreciated. Edited January 13 by LFMc Quote Link to comment Share on other sites More sharing options...
LFMc Posted January 16 Author Share Posted January 16 Might a soft reset in the Dashboard/My Electricity console be an answer? Will the soft reset change any of the ID information that the Utility needs to reinstall the monitoring? Will it in any way mess with any of the programming or AMI NEM PG2 node set up? I am open to other suggestions too. Quote Link to comment Share on other sites More sharing options...
Geddy Posted January 16 Share Posted January 16 @LFMc this issue seems that it would be best suited for a support ticket with UDI. https://www.universal-devices.com/my-tickets Since nobody offered suggestions following first post it's probably something most users aren't familiar with and best way to get support from UDI is through their ticket process. They can suggest what you need to do or describe what to check with your utility company to get this corrected. 1 Quote Link to comment Share on other sites More sharing options...
LFMc Posted January 17 Author Share Posted January 17 I did a soft reset on the Energy Dashboard/My Electricity and the system reconnected to the meter and data is flowing again. Big thanks to UD support. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.