someguy Posted May 9, 2010 Share Posted May 9, 2010 I just yesterday noticed that the ISY gives the option to beep various insteon devices. I'd like to know which devices have the beep capability? Is this new? Do only new switches of certain types have the beep? I'd also like to know what the difference between "1 (beep duration)" and "17 (beep duration)" or any other number is. does it change the beep setting in the switch (like scene adjust does) or does it just make it beep. thanks, someguy Link to comment
Michel Kohanim Posted May 10, 2010 Share Posted May 10, 2010 Hi someguy, SWL versions 40 and above (those with the beep feature) and dual band LampLincs and some newer version of KPLs are currently the only devices that support the beep command. All it does is a beep the duration for which is adjustable. Some may not honor the duration though and we have yet to figure out the exact values for those. So, in short, it will be a trial and error routine to figure out the beep duration. With kind regards, Michel Link to comment
someguy Posted May 10, 2010 Author Share Posted May 10, 2010 what about icon switches? I have two Icons that beep also. someguy Link to comment
Michel Kohanim Posted May 10, 2010 Share Posted May 10, 2010 Hi someguy, I have not seen those so they must be pretty new. If they support the beep function, then you should be able to use it in program. With kind regards, Michel Link to comment
art Posted December 1, 2010 Share Posted December 1, 2010 Still working on my audio feedback desires, this thread seems the closest. I copied the following from the SMARTHOME Forum. I thought someone on this side may be interested in the reply and could possibly shed some light on my beep duration dilema... Posted - 11/30/2010 : 05:50:58 AM -------------------------------------------------------------------------------- I apologize if this has been asked before, but I couldn't find it in the forums or the manual. Using the ISY and programming my new KPL, programs have actions that include beeps of varying durations. However, no matter which beep duration I choose, all my KPL does is chirp once for each beep command sent. Is there something not supported, or am I missing something ================================================== FROM: Tfitzpatri8 Administrator USA 2600 Posts Posted - 11/30/2010 : 07:06:25 AM -------------------------------------------------------------------------------- Other software supports sound differently, as a series of beeps. I've tried the ISY Beta FW 2.8.5 program actions on a variety of newer devices here, but only get a variable-length beep on an IRLinc Transmitter--everything else gives a uniform chirp. Sounds like a question for the folks at Universal Devices. -------------------------------------------------------------------------------- Volunteer Moderator & Home Automation Enthusiast Link to comment
jkraus Posted December 1, 2010 Share Posted December 1, 2010 ha, this would be useful. I have a lamplinc that I swear is removed, but isy says that it is linked and I can turn it on an off?? I would love to send it a peep to see if I can find it, as this is driving me nuts as I have looked in all my outlets. How do I beep it? Link to comment
art Posted December 1, 2010 Share Posted December 1, 2010 If it is capable, this should work: Just write a short program to repeat an action step. The insteon action steps that beep (if they are available) show up below query, but before the backlight actions (for a KPL) If Then Repeat Every 1 second Set 'Living Room / Living Room Fan' 1 (Beep Duration) Else This will chirp my KPL every second forever.... [/b] Link to comment
art Posted December 2, 2010 Share Posted December 2, 2010 Anyone from UD want to comment on the third post up? Smarthome wasn't being helpful. Link to comment
Michel Kohanim Posted December 2, 2010 Share Posted December 2, 2010 Hi art, We have tested Beep function with multiple products; the only problem is that the duration range is so low that one would hardly notice the difference between 1 and 255. With kind regards, Michel Link to comment
justin.cool Posted December 23, 2010 Share Posted December 23, 2010 So far, I have had mixed success in getting BEEP to work. See my listing below, not exhaustive by any stretch, but a start. Beep Support Listing Some Beep supported (2876SB) Icon Relay Switch v.39 (B2457D2) LampLinc BiPhy v.3A (2476S) SwitchLinc Relay W/ Sense v.37 No beep support in my configuration (2876DB) Icon Dimmer v.39 (2486S/WH6) KeypadLinc Relay v.33 (2476S) SwitchLinc Relay v.35 (2486DWH8) KeypadLinc Dimmer 8 Button v.2D Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.