This is what I have currently.

ISY994i/IR PRO (1110)

                -OpenADR (21010)

                -A10/X10 for INSTEON (21075)

                -Z-Wave (21100)

                -Portal Integration – UDI (21075)

What equipment / modules do I need not to lose any of my current configurations?

The current product (eisy) has all those modules built-in as standard. To use Zwave, you'll need to get either the ZMatter dongle sold by UDI, or get a Zooz 700 series Zwave stick, if you can find one.

Thanks for the quick response,

Joe

Oh, do I need the PLM adaptor?

If you have the USB model (ends in a U), it will plug right into eisy. If you have a serial (ends with an S), you need to buy the serial to USB adapter from UDI when you buy the eisy.

If is not HW version 2.4 (or higher, there's a sticker on it), I'd consider replacing it as it comes from a time when cheaper capacitors were used and they are notorious for failing.

If it's 2.4 (or greater) moving it over will save some time in not having to update your Insteon network to be programmed for a new PLM.

No U model, Serial and I have replaced caps numerous times.

Thanks,

Edited October 15Oct 15 by nbsproducts

22 hours ago, nbsproducts said:

No U model, Serial and I have replaced caps numerous times.

Thanks,

I would get yourself a spare PLM. The caps aren't the only thing that fails on those older PLM's. Having a spare PLM will prevent delay should your PLM (when your PLM) fails. You wouldn't want to have your PLM fail and discover that the PLM's are on backorder or something.