'Insteon' no longer appears as a drop down option under "Actions" when creating/modifying a program. Has this option been taken away? I've used multiple AI platforms and they all provide the same advice - none of which has helped.

I can control my Insteon devices fine. Insteon support is enabled in the configuration. I can reach the PLM, I have matching firmware and UI. I've updated Java and cleared cache.

** All I'm trying to do is create a program that will take a light that is already on and have it dim to X% over a period of time. Say I wanted it to go from 100% to 25% over 30 seconds. I've tried adjusting ramp rate in the program but it has no impact. **

Look under the config tab in iox, there's a checkbox option to turn Insteon capability on or off. What you're describing sounds like the symptom of it being unchecked

Edited Tuesday at 10:16 AM2 days by paulbates

12 hours ago, ryan.mercer said:

'Insteon' no longer appears as a drop down option under "Actions" when creating/modifying a program. Has this option been taken away? I've used multiple AI platforms and they all provide the same advice - none of which has helped.

I'm not sure when it changed, but do you think you remember it like this:

I found this image in the ISY Cookbook. My guess is that since the cookbook was written in the ISY 4.x firmware generation that it was older and perhaps even prior to ISY 4.x firmware options.

I currently see this as the option:

My expection is that "Your Devices" replaced the Insteon/A10 option a long time ago.

If you're thinking/looking somewhere else the only other place I see "Insteon" still mentioned is in Adjust Scene in the first dropdown then "Insteon" is in the body of the options.

I think what you are trying to do is adjust scene then activate the scene. It looks like you can do that in the "Adjust Scene" option.

I've never attemped to do this kind of adjustment, but perhaps this is where you're looking for "Insteon" to be able to control a device brightness over time. If it's not a scene you're trying to change then it might be possible with "Your Devices" and have to set a brightness level and a ramp rate then a command to dim or brighten. Maybe some of the program gurus can chime in on that process if you're still having issues.

10 hours ago, Geddy said:

I'm not sure when it changed, but do you think you remember it like this:

I found this image in the ISY Cookbook. My guess is that since the cookbook was written in the ISY 4.x firmware generation that it was older and perhaps even prior to ISY 4.x firmware options.

I currently see this as the option:

My expection is that "Your Devices" replaced the Insteon/A10 option a long time ago.

If you're thinking/looking somewhere else the only other place I see "Insteon" still mentioned is in Adjust Scene in the first dropdown then "Insteon" is in the body of the options.

I think what you are trying to do is adjust scene then activate the scene. It looks like you can do that in the "Adjust Scene" option.

I've never attemped to do this kind of adjustment, but perhaps this is where you're looking for "Insteon" to be able to control a device brightness over time. If it's not a scene you're trying to change then it might be possible with "Your Devices" and have to set a brightness level and a ramp rate then a command to dim or brighten. Maybe some of the program gurus can chime in on that process if you're still having issues.

Thanks @Geddy - the screenshots you shared are what I was thinking about. Must have been aged out some time ago, and I clearly never used the 'Insteon' value before. I'll have to look at adjusting the scene (as they are in a scene) but sometimes that becomes a really slippery slope 🤣