It should be the same code, but I'll confirm

If you can enable debug and capture a ghost event (along with rough time) and pm me log, I can see if I can find the issue

Code was updated, but not activated for the 5708 switch - sorry

I'll build a version 1.8.61 in the non-production store to make sure it works for you - can you test before I release

Perfect. I was just about to post that I am 99% sure I just got a phantom press - I was chasing down two issues, one with the Rachio and the other with the Yolink button - so when I saw the Rachio issue, I thought it was making me think this was an issue - but I figured out a programmatic way of getting around the Rachio problem, and then the button just pressed like 20 minutes after the last time I was using it. So this makes me feel alot better. Will be happy to test. I haven't installed a "non production" store plugin before. Is it pretty obvious where to get this?

And I found the non production drop down, ready where you are. Thanks.

Installed. I'll do some tests see if I get a reoccur.

So far, so good. Just uploaded it, and ran it, no phantoms yet. Let me wait about an hour to ensure we are good.

I also have another 4 button remote - "Flexfob" - Model YS3604-UC. Is that one covered by your code also?

The original issue was related to smartRemoter devices, so I believe it is covered - I do not have all permutations to test, and each behave slightly different but I do believe the ghost triggering so common - so it should be addressed already

OK, it's very close to the original model number that started this, I think mine just has 4 buttons instead of the 2. I truly appreciate how quick you checked this out and provided code. Awesome support!

Let me know when you think it works and I can do a full release

Well, it's been over 20 minutes and no phantom presses. Did a couple tests on the remote fob, and nothing yet. Pretty sure you're good. Thanks again!