I have two zooz exterior motion sensors and they both have had pending writes for some time - this causes eisy-ui to indicate two "Pending Operations" via a pop-up. Is there any way to cancel those pending operations to get rid of the error message? Will this effect updating my Zmatter firmware from 7.32 to 7.46?

I am curious how this resolves, because I have the same experience. One Zooz motion-sensor and one Ecolink motion sensor, both Z-Wave. I have tried moving through their motion-areas and triggering these (outdoor) sensors, in the hope that when they're awake that they could satisfy these pop-ups. Alas, no. I even took one down and poked the backside button ("wake up" or "include/exclude" button), to no avail.

Everything works, but these brief orange messages suggest a pending 'something'... ❓

Edited Sunday at 02:03 PM2 days by GPritchard

If there are no issues I would ignore, this is a warning not an error. This will likely be changed to be the same as the admin console, no heads up notification, just a badge next to the node.

These pending operations have persisted for months on my eisy - this morning I got on a ladder and moved the devices in question near the ZMatter dongle location and was able to clear the "pending operations" by taking one of several actions by right clicking the device in eisy-ui and selecting configuration - I tried "update", "update with interview", "write changes" and "update neighbors" - I think that "write changes" may have been the action that ultimately fixed the issue but not 100% sure as I had some confusion with the eisy-ui interview process (I am not sure if it ever completed successfully for either device) and the first device appears to have self-deleted and I had to re-add it to the system - by the way these were two Zooz ZSE29 outdoor motion sensors that had the "pending operations" issue

One question related to this - how do we display the Z-Wave neighbors for a particular device in eisy-ui?

Edited Sunday at 04:46 PM2 days by JTsao

11 minutes ago, JTsao said:

One question related to this - how do we display the Z-Wave neighbors for a particular device in eisy-ui?

How is this done in the Admin Console?

It's under XRAY->DH DEVICE - I don't see an equivelant way of displaying in eisy-ui

Oh, yes. This was accidentally removed when Right Click > Configuration was split into two pages. It will be Right Click > Node Info. Already fixed but not yet pushed to staging. e.g. still missing in Node Info