November 11Nov 11 @Panda88 Updated plugin to 1.8.71 last evening and this morning noticed motion sensors weren’t firing programs. I can see their status change in Yolink app and in Eisy but programs aren’t running. Some door sensors work as expected but not all.The motion sensors command setting were set to “On Only” before update but all changed to “ON/OFF” after. I’ve changed them back but still not working.Reinstalled plugin, restarted plugin and Eisy, with no helpLog attached. TIA!YoLink-log-2026-11-11T14-14-54.799Z.zip Edited November 11Nov 11 by drprm1
November 11Nov 11 Is there a specific motion sensor that does not work - it seems to work according to the logI have had to load program - change something reert it back and then save - after that programs started to work again I am trying to understand what changed regarding the startup - it is supposed to be saved but an upgrade may reset the database - maybe I need to store in files as well
November 11Nov 11 Author I’ve got a few ms not working correctly. I’m focusing on a couple I use for “entry motion” lighting. The ms fires and status updates in Eisy but program doesn’t run. I have changed program and saved it with no change
November 11Nov 11 I think I found the bug at startup - I was actually using files, but they got erased when installing new server now - it has a accompanying bug If we see the sttes changing under nodes, it should trigger they program - the node is not involved in triggering the programs - try to same the program again - I had a similar issue with eISY beforeTesting the node has become difficult for existing nodes with eISY - but I'll do my best to see if I can test it Edited November 11Nov 11 by Panda88
November 11Nov 11 Author If it matters I was checking a different ms which was a controller in a scene that appeared to be reset as a responder. (I was changing so many things to try and get it to work that I may be mistaken about this)1 minute ago, Panda88 said:I think I fopund the bug at startup - I was actually using files, but they got erased when installing new server now - it has a accompanying bug If we see the sttes changing under nodes, it should trigger they program - the node is not involved in triggering the programs - try to same the program again - I had a similar issue with eISY beforeConfused as to what you’re asking me to try
November 11Nov 11 Go to the program that is not firing - change some thing - save it - change it back - save it and try again
November 11Nov 11 Author 1 minute ago, Panda88 said:Go to the program that is not firing - change some thing - save it - change it back - save it and try againDone that a few times with no luck
November 11Nov 11 have you tried eisy-ai and ask why the program in not firing at a time where is was supposed to fire - \Michel will provide you with a key to try it out
November 11Nov 11 Author Changed the trigger in programs to status rather than control (this previously worked) and seems to be working. At least the program fires.What changed?Spoke too soon. Not working Edited November 11Nov 11 by drprm1
November 11Nov 11 It should be fixed in the new release - DON got stuck because of missing files - I think the installer in eISY now erases everything - vs overwriting filesI am testing a new release but it will likely be a day or two
November 11Nov 11 Author Thank you!(This program turns the light on at night to keep me from breaking my neck on a couple of stairs. Probably my most important one. 😂)
November 12Nov 12 would you be willing to try a beta version - you have to be in legacy PG3x mode to do this. My programs fire so I cannot really test it
November 12Nov 12 Author 1 hour ago, Panda88 said:would you be willing to try a beta version - you have to be in legacy PG3x mode to do this.My programs fire so I cannot really test itI’ve migrated all my plugins already so not sure what “you have to be in legacy PG3x mode” entails
November 12Nov 12 Author 8 hours ago, Panda88 said:You would have to migrate back to pg3Just Yolink or all plugins? Tell me how and I’ll test it.
November 12Nov 12 Just yolink. You can also wait a little. I hope to release new version today. Testing would be ho back to previous program and check if it works now incl setting the trigger type
November 12Nov 12 Author 26 minutes ago, Panda88 said:Just yolink. You can also wait a little. I hope to release new version today. Testing would be ho back to previous program and check if it works now incl setting the trigger typeWill this hopefully fix Yolink not firing in scenes and not updating variables?
November 13Nov 13 Author 17 hours ago, Panda88 said:I believe it willJust updated to 1.8.79 and it seems to be working correctly! Will test it further the next couple of days.Really appreciate your quick response and efforts.
Create an account or sign in to comment