Keypad status of another relay

[marklin77]

Hi Everyone,

 

I got a KyepadLinc where one button is controlling another inlineLinc that turns on/off the porch light. Currently I have a scene with both keypad_button_b and the inlinelinc, so when I turn on porch light via keypad, its status led is correct. My question is, if another device turns on the porch light, how do I make the keypad_button_b led reflect the on/off status of the inlinelinc? And more importaintly how do I do this via isy?

 

Thx in advance

[Michel Kohanim]

Hello marklin77,

 

What you need to do is to put ALL devices that control the InlineLinc, AS CONTROLLERS in the same scene. This way, all controllers are cross linked with one another and their status follows each other.

 

With kind regards,

Michel

[marklin77]

Thank you for getting back on this so quickly. Currently only keypad_button_b is the controller of InlineLinc within the scene. And as expect the LED on the keypad is representative of InlineLinc's status. But what happens if I turn on InlineLinc from ISY directly. The relay goes on, but the keypad_button_b status does not follow. How do I make the keypad LED follow the status of the relay? I tried making a program and messing with the backlit option but that didn't work too well.

 

Mark

 

Hello marklin77,

 

What you need to do is to put ALL devices that control the InlineLinc, AS CONTROLLERS in the same scene. This way, all controllers are cross linked with one another and their status follows each other.

 

With kind regards,

Michel

[Michel Kohanim]

Hi Mark,

 

From ISY, turn the container scene on/off instead of InlineLinc.

 

With kind regards,

Michel

Thank you for getting back on this so quickly. Currently only keypad_button_b is the controller of InlineLinc within the scene. And as expect the LED on the keypad is representative of InlineLinc's status. But what happens if I turn on InlineLinc from ISY directly. The relay goes on, but the keypad_button_b status does not follow. How do I make the keypad LED follow the status of the relay? I tried making a program and messing with the backlit option but that didn't work too well.

 

Mark

 

Hello marklin77,

 

What you need to do is to put ALL devices that control the InlineLinc, AS CONTROLLERS in the same scene. This way, all controllers are cross linked with one another and their status follows each other.

 

With kind regards,

Michel