ISY - Controlling Network Event

[DevonSprings]

Hi Guys,

 

I have this bit of code...

 

If
       Control 'Great Room / GR-TopOfStairs-KPL.1.1' is switched Bright
    Or Control 'Great Room / GR-TopOfStairs-KPL.1.1' is switched Fade Up

Then
       Resource 'Living Room - Sonos Volume Up'

Else
  - No Actions - (To add one, press 'Action')

 

If you wait 5-10 seconds between keypress you can control the volume Shouldn't this be so that as you hod it, every once and a while it keeps sending the volume up????

 

Virtual Controllers...

 

Devon

[Michel Kohanim]

Hi DevonSprings,

 

You might want to use Fade Up/Fade Down and Fade Stop. Also, in the Action, you have to use Repeat every second so that the resource is called every second while you are holding the button (till Fade Stop).

 

With kind regards,

Michel

[DevonSprings]

Mitch

 

Can you give me an example oaf how the fade stop should work?

 

Is there someway for me to see what a button is throwing off as commands?

 

Devon

[LeeG]

Using Tools | Diagnostics | Evevt Viewer Change Level 3 – the command codes indicate the type of button press

 

ON Command

 

Thu 11/04/2010 09:29:04 AM : [iNST-SRX ] 02 50 14.71.3C 00.00.01 CB 11 00 LTONRR (00)

 

OFF Command

 

Thu 11/04/2010 09:29:10 AM : [iNST-SRX ] 02 50 14.71.3C 00.00.01 CB 13 00 LTOFFRR(00)

 

Fast ON

 

Thu 11/04/2010 09:29:14 AM : [iNST-SRX ] 02 50 14.71.3C 12.9F.E4 41 12 01 LTON-F (01)

 

Fast OFF

 

Thu 11/04/2010 09:29:20 AM : [iNST-SRX ] 02 50 14.71.3C 12.9F.E4 41 14 01 LTOFF-F(01)

 

Start Dim UP

 

Thu 11/04/2010 09:29:29 AM : [iNST-SRX ] 02 50 14.71.3C 00.00.01 CB 17 01 LTMCON (UP)

 

Stop Dim

 

Thu 11/04/2010 09:29:34 AM : [iNST-SRX ] 02 50 14.71.3C 00.00.01 CB 18 00 LTMCOFF(00)

 

Start Dim DOWN

 

Thu 11/04/2010 09:29:44 AM : [iNST-SRX ] 02 50 14.71.3C 00.00.01 CB 17 00 LTMCON (DOWN)

 

Stop Dim

 

Thu 11/04/2010 09:29:48 AM : [iNST-SRX ] 02 50 14.71.3C 00.00.01 CB 18 00 LTMCOFF(00)

[Michel Kohanim]

Hi DevonSpring,

 

LeeG has been kind enough to provide you with the INSTEON traffice for fade start/up/down/stop.

 

Now, what you need to do is to use Fade Up (as a condition in your program) and then use Fade Stop to stop the program.

 

With kind regards,

Michel