oskrypuch Posted April 2, 2011 Posted April 2, 2011 I have set up some routines that will allow the system to survive/restore on a power outage, having to reset EZIO relays and appliance modules, and so on. The ISY is power backed up, it will not go down. The PLM of course is not, and it will power cycle. Is there some way for the ISY (user) to detect a power cycling of the PLM, while the ISY remains powered up? I use a time delay relay on the sense for a 2450, as well monitoring the status of a 2450 relay that is normally set ON, but having something more programatically "direct" would be cool. Also, I've observed that the ISY seems to do a full My Lighting query when the PLM is power cycled and comes back on, although it is not consistent. Is this normal? Of course I would want exactly that done in general. * Orest
Michel Kohanim Posted April 3, 2011 Posted April 3, 2011 Hello Orest, Unfortunately there's no way for ISY to know that the PLM has been power cycled. In Configuration | System tab, there's an option called Query at restart. If this is checked, every time ISY reboots, it queries all devices. With kind regards, Michel
Recommended Posts