rlebel Posted September 25, 2011 Share Posted September 25, 2011 With 3.1.9 MobiLinc HD on my iPad seems to work fine, but MobiLinc HD on my iPhone takes forever to do a full download sync then shows no devices, programs, nothing! Both iPad and iPhone on WiFi, same network as ISY. Link to comment Share on other sites More sharing options...
rlebel Posted September 25, 2011 Author Share Posted September 25, 2011 Further testing this morning I could not reproduce the problem, testing on both 3G and WiFi. Link to comment Share on other sites More sharing options...
InsteonNut Posted September 25, 2011 Share Posted September 25, 2011 Thanks rlebel for the followup, would you confirm something for me? Would you check your settings and report back the following: Do you have both HTTP and HTTPS IP/Port information filled out? Do you have the connect method set to Auto? If Connect Method is set to Auto is MobiLinc detecting HTTP or HTTPS for the connect method? Thanks, Wes Link to comment Share on other sites More sharing options...
rlebel Posted September 25, 2011 Author Share Posted September 25, 2011 Local http:// 10.0.1.20 Local port: 80 Secure https://maxbeach.homeftp.net Secure port: 43443 (redirected by my router) Connect method: auto Detects http for local, https for 3G Link to comment Share on other sites More sharing options...
InsteonNut Posted September 25, 2011 Share Posted September 25, 2011 Thanks rlebel, This is the correct MobiLinc behavior, but I wouldn't be surprised if MobiLinc is unable to auto-detect HTTP at some points throughout the day. I'm working with UDI this morning to narrow in on a network change in 3.1.9 that sometimes prevents MobiLinc from auto-finding the ISY. Just so that you are aware in case you see the behavior change. Wes Link to comment Share on other sites More sharing options...
dstanley Posted September 26, 2011 Share Posted September 26, 2011 My iPad will not work outside of my network now with 3.1.9 on my ISY - all was fine before this firmware update. When I am outside my network I guess MobiLinc cannot find my ISY - Notice no ON or OFF indicators!? Link to comment Share on other sites More sharing options...
InsteonNut Posted September 26, 2011 Share Posted September 26, 2011 Hi dstanley, The 3.1.9 issue is only affecting local Wi-Fi auto detect. Your issue is most likely caused by the ISY rebooting after the firmware upgrade and the ISY being assigned a different IP address. This would cause the router to not be able to route external requests correctly since the ISY now has a different IP address. Please double check your router's port forwarding settings and confirm that all IP address and port settings are correct in the router for your ISY's current IP address. Wes Link to comment Share on other sites More sharing options...
dstanley Posted September 27, 2011 Share Posted September 27, 2011 Hmmm ... My ISY has the same address and seems to work fine on my own wireless and also on 3G when I am at home. The screen shot was on my wifi at my work ... I need to try 3G from my work to see what happens. This is weird!? Edit: Ok ... It does NOT work on 3G ... I was wrong ... It can't find the UUID of the controller Link to comment Share on other sites More sharing options...
InsteonNut Posted September 27, 2011 Share Posted September 27, 2011 Hi dstanley, Can you confirm your router's port forwarding settings? Just to rule out any IP changes in the router/ISY. That would explain why you can't reach your ISY over 3G if you router is now misconfigured for some reason. Thanks, Wes Link to comment Share on other sites More sharing options...
rlebel Posted September 27, 2011 Author Share Posted September 27, 2011 Hi dstanley, Can you confirm your router's port forwarding settings? Just to rule out any IP changes in the router/ISY. That would explain why you can't reach your ISY over 3G if you router is now misconfigured for some reason. Thanks, Wes And, do you access your home through a properly operating DNS, or a static WAN address? Link to comment Share on other sites More sharing options...
dstanley Posted September 27, 2011 Share Posted September 27, 2011 I am connecting over a static IP address to my ISY. Using dd-wrt firmware on a Netgear router. Ports are forwarded to my ISY which also has a static IP on my network. Absolutely no problems with previous ISY firmware - this seemed to have happened with 3.1.9 firmware - probably NOT a MobiLinc problem!? EDIT - wow I can't believe this - I did a remote reboot of my router (I am at work) and now the MobiLinc works - I am so sorry - I should have known better! Dwight Link to comment Share on other sites More sharing options...
InsteonNut Posted September 27, 2011 Share Posted September 27, 2011 Hi Dwight, Great! Glad you were able to figure it out. Thanks for the follow-up post. Wes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.