ingeborgdot

I have been out of the loop for such a long time now. I have been very busy and have had no real need to go into my isy. I decided today to do a little bit with my isy but I can't get in anymore. I can if I put the ip address but can't do it from my computer like I normally did to get into the admin console. It seems to be a java issue. Can anyone tell me what I need to do? Thanks.

And this works with my isy?

Is there an app for insteon and isy?

What I did was put an outlet link in the attic and plugged the fan into it. I control the outlet link with my keypad. It works like a charm.

Email sent.

The only thing I have for my NAS is the 5000 port. I don't use the 443 for it. I had been using the 443 for my ISY.

My computers are actually down today. I am building a new one and using some hdd from the other one. Will be up tomorrow or later tonight. What are your hours and days of operation?

I have no access to my isy from a browser any more.

Here are the screens I get when I try to get into isy99 through a browser.

I have tried the 8443 and no success. All my other devices work fine from an internet browser. The isy is the only thing that does not. This is frustrating.

On my isy the http port was set at 80 and the https was set at 443. I changed the https to 8443. Do I need to do anything to the http in the isy setup?

Maybe this should be but maybe it shouldn't be, I am not sure but I have PFConfig and I did a network scan. It says one port that I am forwarding to is my NAS and its port is open. The other is the isy. It does not even recognize it and says the port for the ip address it is on is closed. What is going on? I can get to it over my network with not problem.

I am changing the port on my isy, but am wondering what the http port should be? I have the https port set to the 8443 but should the http port be set to 80?

I wonder why it worked for the longest time and then it just quit? Weird. Remote admin is not checked.

Here is my address for the address bar. xxx Does this seem right? I am sure this is what it has always been.

I went in and reset my router. I have internet hookup to my NAS with no problem at all. I went in and tried it manually. I went and tried it with PFconfig. After I reset my router it assigned my isy a new ip address and for a second I thought it would work but again it keeps coming back with the 403 message. I don't know what else to try. Anyone have any ideas?

I went to get on my isy99 from the internet access today and for the first time it gave me a 403 forbidden message. Why? I can't find any answers. My dyndns account seems to be fine.

I think I got it.

Man, what do I need to change on my programming? Something is wrong I guess for the jumper settings I have maybe? Anyone care to tell me?

I put the new setting in with the new battery on one of my MS in the front and it is not functioning properly now. It sees because the visitor alert I have made that flashes lights when someone comes to my porch flashed the lights in my house but no outside porch light came on. I will have to look at the programming.

I put the new setting in with the new battery on one of my MS in the front and it is not functioning properly now. It sees because the visitor alert I have made that flashes lights when someone comes to my porch flashed the lights in my house but no outside porch light came on. I will have to look at the programming.

I put timeouts a .5, Led at 25, darkness sens. 35, sensing mode unchecked, on only mode checked, night mode checked. Is this right?

I don't have it in a scene. I just have a program for it. Here is my program for this. What would I need to add to disable it to get the lights to stay on? If From Sunset To Sunrise (next day) And Control 'MS Front Porch' is switched On And Status 'Living Room Front Porch' is not On And Program '2.Front Porch Light on 20 minutes' is False Then Run Program '2.Front Porch Light on 20 minutes' (Then Path) Else - No Actions - (To add one, press 'Action') If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Set 'Living Room Front Porch' On Wait 20 minutes Set 'Living Room Front Porch' Off Run Program '2.Front Porch Light on 20 minutes' (Else Path) Else - No Actions - (To add one, press 'Action') Turns the porch light on for 3 minutes. A program is used such that the 'Wait' is not reinitialized by new events triggering 'If conditions'. If Control 'Living Room Front Porch' is switched On Then Stop program '1.Front Porch Motion Sensed' Enable Program '1.Front Porch Motion Sensed' Run Program '2.Front Porch Light on 20 minutes' (Else Path) Else - No Actions - (To add one, press 'Action') This program returns control to the motion sensor and reinitializes the conditional logic flags. Run Program (Else Path) to reset the motion on/off flag. If Control 'Living Room Front Porch' is switched Off Then Stop program '1.Front Porch Motion Sensed' Disable Program '1.Front Porch Motion Sensed' Run Program '2.Front Porch Light on 20 minutes' (Else Path) Else - No Actions - (To add one, press 'Action') Double tap (Off)disables the motion sensor such that the porch light stays off until the switch is manually turned on again. Purpose of the 'Run Program'... (Else Path) is to reset the motion on/off flag. If Time is Sunrise + 30 minutes Then Set 'Living Room Front Porch' Off Run Program '2.Front Porch Light on 20 minutes' (Else Path) Enable Program '1.Front Porch Motion Sensed' Else - No Actions - (To add one, press 'Action') Turns off the porch lights 30 minutes after dawn and resets the programs flags in case the lights were manually overridden and left on all night.

So, should sensing mode be checked? Not quite sure? Should on only be checked? Should Night mode be checked?

What does a person need to add in the programming to get it to bypass any program so your light will stay on if you want it to. My front MS won't stay on if I turn it on.