jerlands

Roger is free! Jon...

Any lights showing on the front panel other than power? Jon...

Going from the HUB to ISY you should either link devices using "remove existing links" or to factory reset each device. I think the old links if not removed just cause more traffic that never gets anywhere and that may cause problems. Jon...

Type the ISY address in a browser. If nothing is found then the address isn't correct. Check your router for the proper address. Recommended ISY setting are to use DHCP and reserve the address in router. Jon...

Vidéotron doesn't seem to offer sms via email so you might be limited to using network resources to an app like Pushover or to IFTTT maker channel which could send sms Jon...

Trigger Reverse is an issue due to not reversing state on query (3am.) Apparently you're using the contacts that came with the "Garage Kit?" (which are normally closed NC) If I were you I'd pickup the Seco-Larm SM-226L-3Q No need to disable the sensor with the relay disabled. <<-- Oops... I guess you can't disable just the relay Jon...

You either have a scene or a program linked to the relay. What are the IOLinc's option settings? Jon...

I never follow instructions either Glad you got it straightened out! Jon...

On my Win10 notebook I only have to use the PrtSc button but then I paste into Gimp There are apps to do it in one shot. Jon...

It sounds like the keypad is working correctly but you can check by opening Event Viewer to Level 3 (Tools > Diagnostics > Event Viewer) press the keypad button and you should see the trace in the viewer. Jon...

Did you happen to "Delete Modem" before replacing PLM? Open Event Viewer to Level 3 and locally turn on a switchlinc or press the keypad button. You should see the events in the trace. If not PLM is missing the links. You can do "Show PLM Links Table" and search for device. Also will provide number of links in PLM. Jon...

I have an appliancelinc named "random outlet" and works fine. the spoken name appliancelinc or appliance didn't work for me. Jon...

Someone should start a thread @ forum.insteon.com/ others could sign that would express common interest in getting UDI what it needs? Jon...

If you're still having problems you might check your network settings in Dashboard Cert key strength should be set to 2048 (see guide.) Jon...

You need to add the appliancelinc in the portal then assign it a spoken phrase and rediscover Jon...

I would think Smartlabs would see UDI as an ally rather than an opponent which seems to be the case. Jon...

I think Teken is laughing because he knows the futility. Jon...

That must be going around I found the version history in Wiki Jon...

I would think you'd have received an update by now.. in fact your missing two... I'd contact support and see what can be done. 1-877-375-9365 Jon...

If you have the Portal configured and as MWareman notes the correct UI you might reboot ISY Jon...

Don't recall ever having to re-install the UI after java update either and I'm not aware of any java setting that would clear cache on update. Jon...

Yes, I was just curious about update. Jon...

Have you tried rebooting (unplugging power?) Jon...

Thanks! Jon...

Thanks for keep us in the loop Jon...