jerlands

Motions can write then active to update (include battey powered devices to automatic writes)... Leak/door sensors you'll need to put into linking mode. If comms aren't good enough they'll fail to write. Jon...

Well good to hear you're up and running again.. I wouldn't think this to take over a half hour or so... Jon...

My understanding is ISY doesn't have any direct integration with Nest due to Google's requirements for use of API. A possible way to accomplish this is to sense when the fan is running using a device as the In-LineLinc Relay. Jon...

Is your 2476D added to the scene as a controller? Jon...

LeeG was the one who turned you onto that but what I'm curious about is why pulling the air gap on the device sent ISY into such a tizzy. Jon...

My take on it is those settings are for ISY control and not device control. Edit: oops.. just tried a switch and adjusting UI settings applies locally. Jon...

With Insteon it's hard to gauge RF reliability seeing it's dual band but I have On/Off modules installed behind UPS that are hence RF only and require remotes to be 10 feet for operation; so it seems Z-Wave is a little more robust vs Insteon in that regards. Also, I'm interested in the Z-Wave Siren in that it has 5 tones but 106dB seems a bit loud Jon...

To adjust the levels you need to have the device in a scene which can be created with only the one device but needs to be added as a controller. Then write a program to adjust the levels as described in post #2. Jon...

They claim Z-Wave has a range of 25-30 meters indoors but I've heard of locks installed that require repeaters for reliability. Thanks, Jon...

From the wiki... Reset Userid/Password to admin/admin Use a sharp object to push in the Reset Button till the RX, TX, Mem, Error lights start blinking (every second) Hold for 5 seconds till the RX, TX, Mem, Error lights turn on/off consecutively (RX -> Tx -> Mem -> Error) Release You can also use Telnet to reset password... Jon...

On Levels Evening - [ID 00C9][Parent 0090] If From 1:00:00AM To 6:00:00AM (same day) Then In Scene 'Master Bathroom Vanity Light' Set 'Light Master Bathroom Vanity' 20% (On Level) In Scene 'Light Master Bathroom Vanity' Set 'Light Master Bathroom Vanity' 20% (On Level) Else In Scene 'Master Bathroom Vanity Light' Set 'Light Master Bathroom Vanity' 100% (On Level) In Scene 'Light Master Bathroom Vanity' Set 'Light Master Bathroom Vanity' 100% (On Level) In Scene 'Light Master Bathroom Vanity' Set 'Light Master Bathroom Vanity' 100% (On Level) <<-- address the device itself will give local levels. Jon...

Z-Wave has a number of unique devices I'm interested in and I'm curious as to how many devices are need to adequately mesh the network? I have a two story home and the garage is about 25 feet from the ISY (downstairs.) Jon...

Does it show you as online in the UI (Config > Portal?) Jon...

Shee... I was using the drop down menu Jon...

Until the portal gets straightened out for this you could use the portal for one and ddns on the other? scratch that... I had thought you could set up profiles in mobilinc but apparently not. Edit: apparently so Jon...

The options on that page are for 1. Reboot 2. Reset Userid/Password to admin/admin 3. Factory Reset Of course factory reset requires a fresh backup Jon...

I don't know why that's so funny sorry... here's a link for proper reset. observe the light sequence when starting. Jon...

What device is 22 35 79 1? Jon...

Thanks for the clarification... Jon...

I replaced my PLM a little over a year ago and don't remember a wait? Jon...

To summarize then... If UDI had the Honeywell API there is the possibility of localized control using ISY (goes for any networked device having the API thus avoiding the cloud?) Jon...

Understanding this is a little above my grade but I had thought Polyglot allowed communication directly with networked devices? Jon...

I do know UDI has had difficulty obtaining developer API's from a number of manufacturers... Honeywell is probably one of them. Jon...

Vroom much appreciated. Jon...

I typically see 1-3 second wait after I finish command to activation... which seems pretty good to me Edit: however, I've narrowed down my enrollment to 31 devices (scenes, programs, devices.) Jon...