Michel Kohanim

Hello Robert, Would you be kind enough to use Link Management->Start Linking instead? With kind regards, Michel

Hi, 9-5 Pacific Time Monday/Friday Saturday closed Sunday email only With kind regards, Michel

Hello CompKing, Thanks so very much for the update. With kind regards, Michel So far, so good. Been almost 24 hours, and no zero's noted. Fingers crossed

Hi to_lighter, Thanks so very much. If you have not yet enabled internet access, then, please do so ( http://forum.universal-devices.com/viewtopic.php?t=635 ). Then, when ready, please give us a call at 818-631-0333. With kind regards, Michel Hi Michel, Let me know how to proceed so that you can connect to my ISY. Cheers!

gregoryx, As per SH's recommendation, we have reverted to doing i1 for link management for all devices except for motion sensors. As such, yes, it's 100% normal to have "reads" to be much longer since in i2, you can get a record in one call. In i1, you have to do 3 operations to get only 1 BYTE (each record has 8 BYTES). With kind regards, Michel

Wayne, Thanks so very much. Found it and fixed it. With kind regards, Michel

Hi wjoel, I do not think your port is 587 nor should you use TLS. Please try the following: port 25 (default) Userid: you should get from Verizon ( http://www.emailquestions.com/verizon/5 ... tings.html ) Password: you should get from Verizon TLS: unchecked With kind regards, Michel

Hello gregoryx, Thanks so very much for the update and do be kind enough to keep us posted. With kind regards, Michel Not that I recall... but I'm not going to swear to anything. I realized later where the 100 links might have gone: I changed two rather large scenes and consolidated them into one; which I suspect lowered the link count quite a bit. I'll keep my eyes open for any other scene issues; that one really surprised me. Steve's coming by tomorrow to see that weird KPL in action; he has an idea what's going on (as Michel knows). Just thought I'd let others know. ON TO 2.6.14!

bigDvette, You should be OK. Please do be kind enough to upgrade to 2.6.14 before you attempt anything with these switches. As far as EZIO, I am so very sorry. As much as I want to immediately add support for them, I am so very frightened of all the bugs in might introduce in the process. As soon as we have a stable INSTEON environment, we'll start working on it again. With kind regards, Michel

Hi Joe, I am so very glad you were pleased. First of all, it seems that the lockup bug (0,0) has not been fixed. So, if you encounter it, please do be kind enough to send me a screenshot before rebooting. This has to do with the PLM having a spike which throws ISY off and ISY cannot recover from. Now, as far as IOLinc, unfortunately I really do not know what these options mean. Some of the options are in the quick start guide (momentary mode, etc.) but others are just those I took out of the API docs. I would be very interested if anyone could enlighten all of us as to what these options mean. With kind regards, Michel

Hi Wayne, Thanks so very much. Would you be kind enough to let me know how to reproduce it? I just changed the name of devices/scenes and the associated membership nodes got updated immediately. With kind regards, Michel

Hi Robert, If the extra links start with 0 or 22 you can safely ignore them. i.e. 0x0FF8 0x00 .... 0X0FF0 0x22 ... You can safely ignore the above two. With kind regards, Michel

Hi Gary, Aha, I see the problem ... I do apologize for the run around. This is a bug which appears to happen only with i1 KPLs ... thanks so very much for finding it. With kind regards, Michel

to_lighter, I think the best thing to do would be for us to connect to your ISY remotely and see what's going on. I have gone through all the possible test cases and they all work fine; there is something that does not evaluate to true and that's where all the problems lie. sk8er02, Which URL are you using to upgrade your ISY? Are you using http://www.universal-devices.com/99i? If not, please do give it a try. If yes, then please try the direct URL from ISY and let me know. If all fails, please do be kind enough to enable remote access and then call our tech support so that we can inspect it remotely. With kind regards, Michel

to_lighter, I think the problem is that sunrise/sunset have not been evaluated. Would you be kind enough to go to program summary and force a Run(if) .. ? Please do let me know the outcome. With kind regards, Michel

RF_Burns, First of all, before attempting anything else, please upgrade to 2.6.14 so that, at the least, we all have the same point of reference. You can find the address in the battery compartment. Please do let me know. With kind regards, Michel

Hello Wayne, This seems to be a bug in the GUI ... I do not know why it says Extra records when the records are actually identical. This shall be fixed but it's GUI related and not device related. With kind regards, Michel

Hi LG, REST and Web server module both require 99i. With kind regards, Michel

Hi Mike, Good point. 00 means end of database so everything beyond that field should be ignored. 22 means logically deleted (can be used for other links). Will make the recommended changes. With kind regards, Michel I am set to automatic here. Just to test the fuction, I took the 1st device in my list (a SwitchLinc Relay v.2C) and read the device table links (came up with 4). I ran a compare and the ISY shows 3 (marked the last one as an 'extra record'. BUT that last one is: [Extra record] 0FE0 : 00 06 09.92.84 00 1F 01 Doesn't the 00 mean it's a 'deleted' record? I then right-clicked and restored the device, and the table does not change - it still shows that 4th record. If I am correct and that is a deleted record, perhaps in the link table when doing a comparison the gui should mark it as 'deleted - ignore' or something similar.

Hello to_lighter, I think I know the problem: we just added the feature that allows the query to query the status of the buttons and this may have had an adverse impact. Let us check it out and will get back to you. With kind regards, Michel

Hi Robert, If restore does not fix/cleanup the issues the we do have major problems! Please do make sure you use Link Management->Advanced Option->Automatic and try restore. If still they are not identical then please do let me know the type of device and firmware version. Thanks and with kind regards, Michel Hi and thank you for the nice tool but I also have many such links and I belive there should be none a device restore does not clear the problem do we need to do a reset and then restore or will you be kind to give a clean up tool or the option to clean Regards Robert

Hi Gary, what's your KPL's firmware version. Are you sure you are using the automatic mode? With kind regards, Michel

Hello Gary, Please do be kind to: 1. Go to Link Management->Advanced Options->Automatic (please do not change this) 2. Since ISY uses the firmware version to figure out what to do with the brightness, you will have to link it using Link Management->Start Linking simply because (apparently in your case), your KPL is not reporting its firmware version Unfortunately, we are not going to do anything with EZxx till we have a fully functional and official 2.7 release out. The amount of complexity which EZxx integration adds to test/regression testing is currently too high to even consider. With kind regards, Michel

Hello jbredz28, Yes, indeed. Joe, Thanks so very much for the update. I know where the problem is (for the climate) and it's going to be fixed immediately. Rest assured that the issue is ONLY GUI related and your programs should work fine. Mike, Thanks for the pointer which pointed me to the GUI issue. Jim, Thanks so very much for the ISY Link Table issue. It shall be fixed immediately. With kind regards, Michel

Hi Joe, ISY cannot communicate with your thermostat. I can see the traffic going out of the PLM (which is correct) and the thermostat does NOT respond. This said, however, other devices do respond. Would you be kind enough to take the dongle out of your thermostat, wait 10 seconds, and plug it back in? The weather information: The station you are using responds intermittently (I am checking it with my own client and comparing it with mine) and with blank data. Perhaps you would like to use the one closest to Lebanon? With kind regards, Michel Michel: No problem, that's why I didn't remove the thermostat...You may want to take a look at it. Also what is the issue with the weather info on the Climate page? Joe