Kentinada

@IndyMike The thing I was trying to accomplish was having a seperate program to turn the lights on based on motion and a second program to start a wind-down timer and then turn the lights off when the motion detection went back to no motion. That works with an INSTEON motion sensor. I doesn't appear that the Ring Motion Sensor in the StickUp Camera reports the motion clearing event.

Attaching V2 of Notifications for Dummies with the embedded hyperlink that works and the removal of the Pushover mention. Decided to keep this focused on UD Mobile Notifications. Notifications for Dummies V2.pdf

I had an INSTEON motion sensor there but when I installed the Ring Stick-UP camera with motion sensing, I took the INSTEON sensor down. Didn't think I needed 2 sensors.

Is there a how to guide on writing Node Servers/plugins for EISY?

So my Ring Stick-up Camera and Node Server work fine. See the code below which messages me when motion is detected. The test is what I would use with an INSTEON motion detector. But I also wanted a test when the motion detector stopped sensing motion using a '07-Front Porch / Ring / Front Door (Motion)' is not switched Motion but this does not work. I looked at the settings of the Ring camera itself but didn't see anything helpful. Can this be done does anyone know? Front Door Motion - [ID 001D][Parent 001C] If '07-Front Porch / Ring / Front Door (Motion)' is switched Motion Then // This is a Message sent to UD Mobile Set 'Notification Controller / UD Mobile' Send Message To Kent Sound 'default' Content 9 Notification ID (ID=9) Else - No Actions - (To add one, press 'Action')

I had this one, switched to the 2007 to get S2 support. Same basic thermostat, one has S2 smart start, didn't even need to re-wire anything Do these T6’s still use the Resideo Smart Home app?

@Goose66 how did you pull that off?? I cannot get anyone to return any contact.

I opened an issue on GitHub for this plugin but have had no response from the author.

Are Zwave thermostats natively supported within the eisy? i.e. no node server necessary? This assumes you have the Zwave add-on for eisy BTW.

@Goose66 yes I can although if you mess up your password, you’re toast because you CANNOT get a password reset. But I do get logged in but the configuration of the node server fails on the last step. See this thread:

I am hoping we can get some dialogue going here on what thermostats people are using and how they interface with the EISY. I am going to be shopping for new thermostats soon so I’d really appreciate hearing things like: what make and model are you using? wifi? Zwave? Other? is there a working node server/plugin if one is required to integrate with the eISY? is there a fee/cost for said node server/plugin? pros and cons you’ve found so far with your thermostat of choice? I’ll start with my current experience. i have 2 Honeywell T9 wifi thermostats installed - one for each zone in my house. they are wifi thermostats and the Wi-Fi connection works fine. the Honeywell Home node server that would let you interface these thermostats to your eISY is dead in the water. Resideo support has gone completely dark. no fee for the node server but as I said, it’s broken on the Honeywell side of things. the T9 does include HomeKit support which works fine but the eISY does not yet include HomeKit support. The Resideo IOS app is terrible. I routinely have to log out and back in again to get the app to refresh to the current state of things. Ok your turn, go!

@Geddy Thanks for the idea. The re-install seems to have worked. I did check the portal remote connection just now too and it's all good. Thanks!

I re-installed the Node Server and it is once again working. Not sure if this was related to the 5.8.0 update or not but at least it's working again.

It is something on the EISY/Node Server side. I enabled notifications in the Ring app and it works fine. But no motion message was sent from my EISY. Very simple notification program: Front Door Motion - [ID 001D][Parent 001C] If '07-Front Porch / Ring / Front Door (Motion)' is switched Motion Then // This is a Message sent to UD Mobile Set 'Notification Controller / UD Mobile' Send Message To Kent Sound 'default' Content 9 Notification ID (ID=9) Else - No Actions - (To add one, press 'Action') I get nothing.

My Ring StickUp Motion Camera which was working fine has quit working or at least the node server/plugin has quit. I did upgrade to 5.8.0 firmware today so I'm not sure if that is related or not. When I test the Ring device from the AC, it fails. See Event viewer log attached. Also attaching the dashboard view of the Ring Node Server and everything there looks OK I think. Any ideas where to start?

@Javi I can log into ring.com and I can open a live feed view to my StickUp camera. Maybe something has changed?

@Michel Kohanim I'm sure you get asking this a lot but can you give us any sort of guess on HomeKit integration availability? I went down the HA Green path but it adds too much complexity for me.

@Javi I have a Ring Stick-up Camera that I have integrated into my EISY environment with the Ring Node Server. There is no way to add this to UD Mobile in the cameras area even though it works with EISY?

First, I have never received any response from Resideo Support regarding resetting my old password on the Honeywell Home Developer site. So I decided to try using a new email address. I created an account with my new email address (one I would only use for this purpose) and I got all the way through the node server installation instructions to the last step where it failed. From the installation instructions on GitHub, both my thermostats show up, I click CONNECT and then it hangs and never gets to the point in the instructions below where it shows the User ID. So I'm back to dead in the water with Honeywell Thermostats. Anyone else made it this far and farther?

Thanks all for the info. Looks like for the common eISY user, which I think I am, there is no simple method to test. I guess I’ll have to wait for my current PLM to die (which it more than likely will do) and swap in one of my spare PLMs.

Is there any way to test a spare PLM to see if it’s any good short of swapping it in for my working PLM?

@Ross I completely agree! UD - feature request?

@lilyoyo1 not sure what Control 4 is. But rather than replace my Honeywell thermostats right now, I decided to try the Home Assistant Green to tie my HomeKit world, where my Honeywell thermostats are recognized, to my eisy world. We see how that goes. I thought for $99, it was worth a shot.

@wmcneil so a little more detail. Sorry if I confused things. I have Honeywell/Resideo T9 thermostats. One upstairs and one downstairs. I wanted to connect them to my eisy through the Honeywell node server. I used this in my old house with RTH95xx (don't remember exact model numbers) thermostats and my ISY994i. The node server instructions have you create an account on the Honeywell/Resideo Home Developer site. I already had an account but my password was not working. I have tried many times to get a password reset to no avail. I have been communicating with Honeywell Home through FB Messenger. They gave me the email address for the support group for this which, by the way, was not anywhere on their website. I have been trying to get a response for 3 weeks and have heard nothing. I told the Honeywell Home people through FB Messenger and they said they'd reach out to them. Nothing. So I assume this is dead. AND even if it's not, I'm not interested in staying with a product that is so poorly supported.

@lilyoyo1 Thanks. C4?