andrew77

Hi guys Every time I renew I sign up for two years (solely for convenience) I just received my alert to renew and I only see one year options. Am I missing something or is the two year option no longer available? Andrew

Hi Paul, Thanks, this worked. I factory reset both affected devices and its all good.

I’m not sure. How would I look for that?

I cleared and factory reset the remote. I just added it back in to the EISY and it still behaves the same as before. What's the next step?

I figured. I’ll try that and post back tomorrow.

Hi Techman Thanks for the reply. I've resolved all writes and the problem seems to persist. As an aside, I programmed the B button on the remote and the GUI says the device is changing but the device doesn't react either. Should I delete the remote from my EISY and rediscover it?

Just wanted to add that another device (a SWL upstairs) also shuts off when I click the remote button. The devices don't turn back on when I repeat click but the intended device works as it should. Both devices that are affected (and shouldn't be) don't show any percentage or on/off change in the EISY GUI (apologizes for the spamming, just want to get all the info I have typed out here.)

Sorry for the vague title. I have a very simple scene where a SWL and a button on the mini remote control the SWL. When pressed, the mini remote controls the device as expected but it also shuts off my office downstairs (button A on a KPL) I've included screen grabs to the remote's button and the KPL button's Membership. I'm unclear what to do next

I had to relink but everything seems to be back. Thanks to whoever fixed it. and don’t scare us like that again

I’m not sure if this is just a system glitch (it seems coincidental as far as timing) or if it’s just me but when I ask Alexa to trigger an EISY lighting scene (or anything EISY) it tells me ”the skill linked with ____ is not enabled. Please enable the skill to control this device.’

I rebooted everything (including the Harmony hub) and it seems to work now. I know I didn’t see much traffic on this post but I’d like to keep a dialogue open where the old A/V gear control is heading and what solutions everyone has. I love being able to give the home voice commands for pretty much everything and wouldn’t want to lose that ability.

I should add the Alexa unit now says Apple TV is in a mode that doesn’t accept requests. Please check the app or the settings

I tried to sign in and found this. but when I go to my.iso.io it says I'm still active until March 2025 (in case this helps)

I'll give you guys some info first. I have a Harmony Hub connected to connecting blocks that have IR blasters attached to my AV gear (receivers, Apple tvs, projector/tv etc) When I say "Alexa, turn on Apple TV downstairs" she says "enjoy the movie" (programmed in the Alexa iOS app) and the EISY changes the lights and the Harmony hub blasts everything to turn on the AV gear. I have a similar program/routine for upstairs. Last night they worked fine. Today they are not. The lights change appropriately but the AV gear doesn't turn on at all. I have the old Harmony remotes and they trigger the scene/AV gear just fine. I'm assuming the problem is cloud/internet based? Maybe AWS is down? This again brings me to this post of mine Will the EISY one day replace all our 'smart home' stuff and be the hub that controls everything? I'd love that. Especially as EISY has this forum (one of the best forums out there IMO) and most other companies have a help email that takes forever, replies with FAQ answers, etc) Andrew

Hi Greg. Thanks for the tips. I tried both but I still don't see why the Lamplinc is triggering in the middle of the night. I'm wondering if it's an old program it still remembers. Is there a way to make sure theres no obsolete programming actually stored in the Lamplinc? (if thats even possible)

Is there a way to see when a device was last turned on? I have a Lamplinc that for some reason turns on in the middle of the night. I cant see it in any timers etc. I was thinking if I could see when it clicked on I could have a better time isolating the issue.

The bulbs all work properly. When I tell Alexa to turn on the device she responds as it should but in the scene(s) it doesn't. It used to just fine so I'm unsure what new interference there is.

I have a few scenes with a LampLinc that doesn't turn the light on. The GUI and the iPhone App both show the device changing as it should but the light doesn't turn on. I tried removing the device from one of the scenes and putting it back in but that didn't seem to reset it. Any ideas would be great

I’ll try that when I have a minute thank you for the tip.

Me too. Easy is solid until I get an issue. Then its like I'm trying to sew a banana 🤣

Hi Paul. Thanks for the reply. I was wondering about that. I’m not sure why the GUI doesn’t find the ISY until I refresh it. Any thoughts?

When I click on the icon to start the GXUI it now says Not Found and when I refresh it finds it. It used to have two options (LAN and something else) but only the LAN shows up now. Obviously I have functionality but I'm not sure if this is the start of something bigger.

It seems my issues are back again. I'm sending my 2314U to Aartech to get tested for replacement if they find anything wrong with it. I have an old 2314S but I know I need an adaptor to use it with my EISY Is this what I want? https://www.amazon.ca/BENFEI-Ethernet-Compatible-Notebook-Windows7/dp/B08KWC7D78/ref=sr_1_3_sspa?crid=1RGF6CZ5PI5TP&dib=eyJ2IjoiMSJ9.cnPCHQf58jiLA44xLX-icWV_nr9ZD9CKXYOZBByfT2ibRKyk8DyLOazxDfAlAAD3XNB7Cbk995y21UQIEMw9hEOwi4P9WYQoZgx4f5hrts9y7kd_sv1kazC_2pZroRnxfieWFQfQoXwCbZm2D1J_DmTuNaRSw5acvJo_40noTWLui605xVfhduE85hEZl-HAO5Pvqw-j_eFwJP8dmkVTgotu4JTyO7jm_MwqAFKB-RDcdIsEuk2BGtVLc9QflEMY1wIF15NJnbrrhX9su4Mo9P6Hq43Y1a3f1uUZaxsZaU8.MdK00S_Rr8y9n2Fl9lmgHU2Ya8aCltC9kD0MY5uvfGs&dib_tag=se&keywords=rj45%2Bto%2Busb&qid=1725638391&sprefix=rj45%2B%2Caps%2C174&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1 (apologies for the double post, internet here is garbage today)

My issue have come back again. I'm sending my 2314U to Aartech for them to test it to see if its the problem. I do have a 2314S here that I can use in the meantime but I need a different connector to hook it up to my EISY. I believe its RJ45 (maybe, I'm not sure) to USB A it looks like. I'm just asking for confirmation that's what I need to try to find online. I'm also assuming it's an Amazon thing? Drew

I can look around. I'm sure theres a laptop somewhere around here that may run 11