andrew77

I've recently been getting this error when I start the console. I click OK and it goes away and the console seems to work fine. Just wondering if its something I should worry about? Drew

I think I've found it (I guess I'll know tomorrow morning) The all off scene had the closet set at 100% as opposed to OFF I'll update tomorrow if its worked or not.

So I’m now looking for devices with the address 4C.19.94 or 39.7C.2C correct?

I used it once solely to check another switch. I didn't have it programmed for any scenes etc. Heres the screen of the Links table. I'm not sure what I'm looking for

The new device didn't replace an old device, just a manual dimmer. I looked at the programs that triggered in the middle of the night and deleted some old ones. I'll see if that solves it. If not, I'll post back.

Not a great title to my post so apologies. I grabbed a SWL and replaced a regular switch for our bedroom closet. When I 'discovered and added' it I selected add device and remove all previous links. But every morning we find the closet light on. I looked but I'm not able to see why its turning on. Is there a way to find all programs/timers that contain a certain device? The screen grab is the Membership tree

That makes sense. Thank you for the quick reply.

This is awesome. Is there a repository (I just wanted to use the word repository) for simplified Alexa phrases?

Just adding some new scenes and I noticed theres no check box that used to say "Apply to all devices" (something like that) where I could select all devices in a new scene and change their percentage all at once. Maybe its moved?

I'm assuming these are programs that now that I've updated have orphaned devices (replaced but still a ghost in the machine somewhere) "Not Specified" is usually a device that I've replaced with the same type but for some reason they don't recognize it? Not a big deal as there are no working issues. I'm just cleaning up the ISY before my next back up Drew

I'll do this from now on. Some devices will respond to "Turn On" but all devices seem to respond to "set" Thank you

Never mind. I left it for 30 minutes and it seems to be working now. Not sure why it didn't. Maybe it needed to finish or reboot itself. Now I have the UD Mobile up and running. Keep up the great work guys.

I've backed up my ISY and when I click on the ISY994Admin Console icon I get the two screens. When I try to click on the old IoX launcher the ISY doesn't load at all in the first drop down screen Any help would be great. Drew

This works, thank you. I'm uncertain why I used to be able to tell the SWL Turn on to __% and now I cant. I have SWL that currently react to the "Turn On ___%" command with no problem.

I just replaced a SWL using LeeG's directions Everything seems to be good. I deleted the old address in the Portal and in the Amazon Alexa Smart Home browser page. I've added the new device as a light etc. All good I can tell her to turn the device on and off no problem. But when I tell her to turn it on 10% or example she says "Hmm, I don't know that" have I missed a step? Drew

Hi Geddy. Thank you for checking in we’ve been running around trying to get a deck and hot tub done so I’ve been out and about more. the isy is working again. I am going to take this as a warning and get a polisy. I have a few devices that are unresponsive. I did a few tests and posted them here. Next I’m going to remove them from the isy, rediscover them with existing links and see how that goes.

@Geddy Entryway SWL (from GUI) Tue 05/24/2022 11:49:17 AM : [INST-TX-I1 ] 02 62 0D 11 F8 0F 11 00 Tue 05/24/2022 11:49:17 AM : [INST-ACK ] 02 62 0D.11.F8 0F 11 00 06 LTONRR (00) Tue 05/24/2022 11:49:44 AM : [INST-TX-I1 ] 02 62 0D 11 F8 0F 13 00 Tue 05/24/2022 11:49:44 AM : [INST-ACK ] 02 62 0D.11.F8 0F 13 00 06 LTOFFRR(00) From Device didn't write anything FANS (from GUI) Tue 05/24/2022 11:51:19 AM : [INST-TX-I1 ] 02 62 19 E5 FB 0F 11 FF Tue 05/24/2022 11:51:19 AM : [INST-ACK ] 02 62 19.E5.FB 0F 11 FF 06 LTONRR (FF) Tue 05/24/2022 11:51:22 AM : [INST-TX-I1 ] 02 62 19 E5 FB 0F 13 00 Tue 05/24/2022 11:51:22 AM : [INST-ACK ] 02 62 19.E5.FB 0F 13 00 06 LTOFFRR(00) Tue 05/24/2022 11:51:22 AM : [INST-ACK ] 02 62 19.E5.FB 0F 13 00 06 LTOFFRR(00): Duplicate or ACK for a different device from device didn't write anything I'm assuming the remaining devices (SWLs) will be the same

@Geddy Here's the log from a KPL Tue 05/24/2022 11:36:56 AM : [INST-TX-I1 ] 02 62 0A D9 29 0F 11 00 Tue 05/24/2022 11:36:56 AM : [INST-ACK ] 02 62 0A.D9.29 0F 11 00 06 LTONRR (00) Tue 05/24/2022 11:37:00 AM : [INST-TX-I1 ] 02 62 0A D9 29 0F 13 00 Tue 05/24/2022 11:37:00 AM : [INST-ACK ] 02 62 0A.D9.29 0F 13 00 06 LTOFFRR(00) Tue 05/24/2022 11:43:59 AM : [ Time] 11:44:06 2(0) The first 4 lines were me turning on/shutting off from the GUI When I went to turn on/shut off from the actual device it only wrote one line I'll post the rest now

They are mainly Switchlincs and one KPL Show up with the red Exclamation mark beside them in the GUI and the usual "Cant communicate" error. I'll do more testing later today. Still cleaning up after the storm here.

Everything seems to be running (haven't checked timers etc yet) except for a few devices. I've tried right click "Restore Device" but that doesn't seem to work. Should I remove them and re add them to the ISY?

@Geddy Thank you for that piece of advice. I hardwired the computer to the switch the ISY is plugged into. It seems my ISY is up and running again. I'm cautious so I'll hold back any celebrations until the system has been up and running for a while. I'm also taking this 'warning' and looking at upgrades. Since I cant get Insteon stuff and 700 series Z wave seems like the best bet I'll keep on the UD site for when there is stock for the polisy models. Thank you everyone that chimed in to help this perpetual noobie with his ISY. Drew

Hi Michel, I did get your email and tried to order one off your site but it wouldn't take my shipping address. Luckily, I found one in a drawer that fit the specs. When I plug it in the TX and RX and Memory flicker slightly but then its just the power LED that stay lit. Not being able to Telnet to it makes this difficult. Anything else I can try?

Just tried to restore ISY and got this error code I know the zip file isnt empty

I found an old power supply that seems to work. I still cant telnet into anything to format the card. I've tried IP address and /desc and just the IP address I get -bash: telnet: command not found

I didn’t realize they sold replacement power supplies. Problem solved.