Techman

drummerfor440 Attached is the installation manual for the smart meter. i210_Installation.pdf

It is one of the new Smart meters that transmits usage data back to the utility via RF. It also allows the utility company to disable your power remotely. Some of the utility companies allow the end user to access the usage data via their web site. It also may be possible to have the utility company provision the meter which would allow you to access the real time data via Zigbee and possibly the ISY (the Zigbee radio module would be required for the ISY). Give your power company a call for more info. UPDATE: The meter you have may not have a built-in Zigbee radio. I believe it uses 3G/4G cell sites to transmit its data back to the utility, if that's the case then you would only be able to access usage data from the utilities website assuming they provide access to end users.

Is the GFCI located in an outlet box or is it a combination GFCI / circuit breaker? If it's located in the panel then you're overloading the circuit. As apostolakisl pointed out you're got way too much on a single circuit. You should run a new dedicated 20 amp line into the garage and probably move the kitchen refrigerator to a dedicated breaker as well.

I'm using 4.2.8 and have no issues that I'm aware of.

Attached is the screen shot when I type in Toronto. Are you running the latest version of the ISY firmware?

Envirogreen No nothing changed other than closing the administrative console, reopening, clicking on find in the climate module, then typing in a city name.

The above post from Larryllix usually resolves the issue when using Windows, I'm not familiar with Safari, hopefully another member will have the answer.

Envirogreen It's not you, there appears to be an issue with either the climate module or HamWeather. My "find" is also not working today. Update: it's now working, it's possible their server was offline for a while.

Which operating system and browser are you using?

Another way to do it is to use two programs. This allows for a more controlled environment and bypasses the relay status. (program one) If Control 'CR112 Sump Sensor' is On run program two (then path) (program two) Then Set 'CR102 Lamp Dimmer' On Wait x minutes Set 'CR102 Lamp Dimmer' Off

Is your metal box connected via romex or metal conduit? If it's metal conduit then you box may already be grounded and you may not need the ground wire.

Real estate laws are state specific. In California anything that is permanently attached to the house, such as light fixtures, switches, etc., is considered part of the real estate and is included in the purchase price unless it is specifically excluded in the listing contract and the multiple listing service. If you don't want your Insteon devices to go with the house it's best to have them removed them prior to putting the property on the market.

Hi Michel, If your referring to the timestamp on the climate module it shows as current. I don't know what it was when I first noticed that it didn't update. There are some "140005 CLI-HW" and "140000 api.aerisapi.com" errors that occurred on 27th and 28th which was most likely the last day the climate module updated itself. I'm not using a static IP address. I've attached a copy of the error log for the last week. Regards Techman

RE post #30, I re-entered the location ID (KSMO) and now the data showing appears to be correct. Seems that the HamWeather data wasn't updating in the ISY as the last time we had thunderstorms was on Sunday July 27th and it was still showing that data this morning, Tuesday July 29th.

Glad to hear it's fixed. You can also add a date and/or time variable to the body of the message to show exactly when each device was activated.

I'm also showing light rain and thunderstorms however the sky is clear and there has been no rain. The reporting station is KSMO

You might want to double check your remaining notifications, stage 2, 3, and 4, to make sure that the fields are correctly populated. The program looks OK. Can you post a copy of one of the notifications that isn't working.

That fixed it, Many thanks

LeeG, This is the string I previously used but it doesn't return the current temperature. Did I miss something? Temperature: ${sys.node.1F 0E E8 1.ST}

What is the correct syntax to send the current temperature of an Insteon thermostat in an email?

Grace Digital just released their new tuner GDI-IRCA700 which has a large color display, it's something you may want to check out.

also when using HAMWeather you'll need to search by city name as it doesn't recognize zip codes. It's best to upgrade to the current ISY firmware as it addressed some climate bugs.

You'll need to upgrade your firmware to 4.2.5 as HAMWeather is better supported beginning with that release (see the release notes for bug fixes).

Thank you. I did the restore and went from a 950 link count down to 306. It's hard to believe that I had so many dead links in the PLM, that's quite a significant memory recovery. The restore screen went up to about 13% then closed. Hopefully everything got restored.