GQuack

The Schlegel FE-599 shows as discontinued on the Smarthome site........

Via laptop on a network outside of my local network at home. Using IE, I do connect but get a certificate error: Mismatched address. The security certificate presented by this website was issued for a different website's address. This problem might indicate an attempt to fool you or intercept any data you send to the server. We recommend that you close this webpage.

So can you point me to what I have not completed or did incorrectly that I am still getting the certificate error when I am connecting remotely? Or is this normal?

So right off - I have almost no knowledge about how certificates work. I've read the network security document on the website, read numerous posts, installed the dashboard, and made my attempt at creating a self signed certificate. All that seemed to go OK. My question: do I need to also create a client certificate? The network security guide says client certificates are created the same way as server certificates but nothing about whether they NEED to be created.

That's it Michel, thank you! Can't say the way the interface is laid out makes sense for me but I'll work through it.

I got it now - difference between local level vs. controller level and those being independent. I need to think about how that might be used. I have the scene working correctly now via the keypad and the ISY. Thank you. What hopefully is my last learning opportunity of this lesson. Why does the HTML interface (iPad / Chrome) still allow only a FAST ON and FAST OFF for the scene which turns the lights on 100% and not to their dimmed levels?

Ah, I will do that. I was going off the post from last night that sounded like I only needed to click on the scene itself to set the responders.

My issue is that FAST ON and FAST OFF are the only options that show up on the HTML interface, there is nothing else. How do I make whatever settings are required to enable just ON and OFF to show up on the HTML interface and for the kaypadlinc to send only ON and not FAST ON?

I am accessing the HTML interface at my local network IP address using Chrome via an iPad.

Lee, so here's what's happening. I did create the scene exactly as you said in your post. Steps I followed just now to confirm - from the admin console: Deleted the scene Created a new scene Copied the appropriate devices and keypad buttons to the scene Created responders and controller as appropriate Clicked on the scene itself Set the responders to the desired lamp levels From the admin console - if I select ON - the scene works fine with the lamps set to their appropriate dimmed level. If I select FAST ON - all of the lights come on 100% From the keypad - when I press the controller button, all the lights come on 100% From the HTML interface - all of the lights come on 100% also but I noticed the only choice on that interface is FAST ON or FAST OFF. Obviously there is something that differentiates between ON and FAST ON with the keypad and the HTML interface operating as FAST ON while the admin console provides both options.

I have a scene defined on the ISY with several lights, 1 100% off and 2 at a 30% dimmed level. The scene works as programmed when using the keypad button defined as the controller. When I turn that scene "ON" via the HTML interface on my iPad, instead of the lights going to their off or dimmed state, all 3 turn on 100%. If I turn the scene "OFF" all 3 lights turn off. What am I missing?

I found this post and followed these instructions. I am now able to launch the admin console "most of the time." Still think I am missing a step as I have to double click on the JNLP file to get the console to load. viewtopic.php?f=27&t=13221&p=103247&hilit=insteon.jar#p103247

I am getting the same error.