ctviggen1

I have an ISY 994i and when I access the admin console, it opens then immediately closes. I've done this for both Firefox and Internet Explorer. Both have the exact same problem. I'm using Windows 7. About the only change I've made is I started integrating Amazon's Echo with the ISY (which works well, by the way). Otherwise, I've made no changes. Does anyone have any suggestions as to what I can do? Thank you.

I searced for the answer to this question, but I couldn't find my exact situation. If I missed a post that answers my questions, please let me know. I have two lights near my garage. I have two motion sensors linked to the light switch for those lights. I can't remember how I originally programmed the sensors; perhaps to not be programmed and to send on and off commands to the switch. Anyway, I want the garage door lights to be on during a certain time period each day. If there is motion during those times, the system is to ignore the motion. Outside that time period, I want motion to turn on the lights for some on-time (say, 5 or 10 minutes). What happens now is that motion during the time the lights are programmed to be on causes the lights to go off. Is this what I have to do? 1) Check programming of sensors and set to remote software management (jumper 5). Can I also use Jumper 2 (disable LED) and Jumper 3 (night only mode)? If I'm going to program the sensors, do they need to be brought inside, closer to my ISY? 2) Is the easiest way to do the programming to do two programs? Program 1: If it's between X time and Y time per night, turn on the garage door lights, else turn off the garage door lights Program 2: If it's between X time and Y times per night, and the status of the driveway motion sensor is on, wait, else turn on the garage door lights for Z time (I can't see that there's a time period allowed for an "else" statement, unless I'm missing something. So, I'm not sure how to do "else turn on the garage door lights for Z time") Thank you for any help.

Hi, I have a very small insteon system (in a large house). I just installed an ISY 994i pro. I have one older x10 insteon device, one insteon dual band remote control switch, one insteon motion sensor (which controls the switch), and two dual band access points. Oh, and a brand new PLM. Last night, I performed "link management, start linking", and found only the x10 device. No matter what I did, I could not get the dual band control switch to be found. Today, I tried to manually add the motion sensor, by using link management, link a motion sensor. I enter the address of the motion sensor, give the motion sensor a name, and hit "OK", and nothing at all happens. Everything but the x10 device is brand new. The only thing I can find on the network is the x10 device. What debugging steps should I be taking? Thank you.

Ha! That worked! Thank you. The programming also came back.

Hi Michel, I tried this on two different computers. The PLM Status/Info says "0.0.0 v0 / Not Connected" I input my program again, manually, but the program is again lost once reentering the browser program. Thank you, Bob

I just upgraded to 2.7.0 (from what version, I'm not sure), and now my programming is gone. File, Restore ISY does nothing. The network of lights/devices still looks correct, but the programming is all gone. If I click on "program summary", I get the error message "request failed". Unplugging and replugging the ISY doesn't help. Any ideas on what I should do?

Hi Michel, I can do this, but my router requests an application name (http, ftp, etc.) which appears mapped to public and private ports. Let me know if you're available sometime next week or in January, and I'll see if I can get you to connect to me. I'd love to get this to work, since I haven't been able to login for a long, long time.

Hi Michel, Don't worry abou the tardy reply, as I can only check here periodically. Could you tell me how to determine my URL? I can determine my external HTTP address, but how would you get past my firewall? My router will allow me to do the following: "The Virtual Server option allows you to define a single public port on your router for redirection to an internal LAN IP Address and Private LAN port if required. This feature is useful for hosting online services such as FTP or Web Servers." Is this what I would use? Thanks, Bob

Hi Michel, This appeared to work for a short time, where it said "negotiating keys" or something along those lines, then the browser (Opera) died. I retried using Explorer and the browser immediately died after attempting to login. Is there anyway to login using the serial port and update/reset the software this way? I'd really like to change the time, because one of our lights comes on at 4am or so, and I think our baby sees the light under her door and thinks we're up. It's no fun getting up at 5am to put the baby back to sleep. Thanks, Bob

I only get the error once, each time after I've restarted my computer. After that, I get a login screen, but I can't login. I do see my program behind the login screen. You had previously helped me debug this. One time, when I was waiting for the wife to come home, I sent you some output files, and then you modified your program to cover the error that was occurring. After that, my ISY worked fine for a while, then I took some time off programming and went to get back in and can no longer get in.

Hi Michel, I am on Windows XP. Verson 5.1, build 2600.xpsp.080413-211:service pack 3. Currently, I get an error: XMLError then something about parsing nodes. The program crashes, then I can restart and attempt to login (whereupon it crashes again). I get a message to update the software, but I can't login to do so.

OK, I uninstalled my spyware program and turned off my virus program. I still get the same results -- trying to login to the ISY kills the entire web browser. Is there an additional step I can take? I'd really like to fix this, because the ISY still has some programming left in it, but the clock isn't set correctly. So, my lights come on at odd times, like at 4am instead of in the evening.

Hi Michel, I tried this using both Opera and Internet Explorer, each time with the same result -- after I try to logon with "admin" for username and "admin" for password, the program terminates (i.e., all windows are closed and the program disappears). Would you happen to have another suggestion? Thank you.

I haven't used my ISY-26 in a while, and I couldn't login. So, I reset the ISY-26 by unscrewing the case and hitting the "reset" button. I did this twice, once while the ISY was not powered and once when it was powered. I held down the reset button for several seconds. Regardless, I get the same error as before -- I can get to the "Authenticate My Lighting" screen, enter "admin" (or "ADMIN") for both the User ID and password, and the screen goes away. Any ideas on how to fix this? Thanks.

I haven't logged into my ISy-26 for many months. I cannot remember my password, and "admin" as username and password does not work (and my normal passwords do not either). How do I reset my password?

I have an ocelot (which I no longer use). I haven't been able to use my ISY yet, but I think it would be better if only because you can put it anywhere on your network. It doesn't have to sit near the computer (and neither does the ocelot, once it's programmed, but to program it you hove to get it near the computer). I'm also starting to move toward fewer x10 components.