sumguy

I'm hoping for a working solution for LiFX. I just did their strip lighting for my kitchen under cabinet lighting. I was debating between Hue and LiFX. Had LiFX before and liked it. Went to install the node server and nothing. Can't get it to work. Then a few days later, the Hue integration is announced. Argh

Yes, program 1 only runs when I arrive home and the variable changes to 1. So every time I arrive home, it will tell program 2 to run. Program two will only run if it is between sunset and sunrise the next day. After creating program 2, you have to right click and disable it otherwise it will automatically run at sunset each night. Even though it is disabled, it will still run when program 1 tells it to. I posted my exact programs below. Hope it makes sense. It's late and I'm half asleep! Jason Arrive Home Night Lights If $Jason_Home_Away is 1 Then Run Program 'Jason Arrive Home Night Light2' (If) Else - No Actions - (To add one, press 'Action') Jason Arrive Home Night Light2 -[Not Enabled] If From Sunset To Sunrise (next day) Then Set 'Outside / Flood_Walkway' On Else - No Actions - (To add one, press 'Action')

I just went through this. You have to create two programs. FIrst program: If State Variable _ 1 Then Run program 2 (if) Program 2 is disabled: If From Sunset To Sunrise (next day) Then Set lights on

I've been having the same enter/exit simultaneous issue for about a month now. I did submit a ticket. It has been extremely frustrating as several times it has logged my exit, but then immediately sends an enter to my Polisy. This causes my garage to open automatically. So there have been a couple times my garage has been open when no one is home. I only have it open the garage when I enter my geofence, so at least the alarm is still set and doors are locked. I also have a notification set to alert me if garage is open for 5 minutes. So I eventually catch the problem. But I still don't like my garage open for 5 minutes. It's been a minor annoying until today. My wife and I just arrived home and were unloading groceries. Her phone woke up when we were in the garage and triggered an enter and then an exit. This caused the garage door to close on our cars lift gate. I'm not happy right now. This problem really needs to be resolved. It was working so well before and was incredibly reliable. Looks like some iOS change that has caused it. Really frustrating.

I do leave it running in the background. It was working reliably until a few versions ago when the app crash was occurring. But now that the crash seems to be resolved, I am still having weird geofence issues. Sometimes it won't trigger at all and the logs don't show that it entered or exited. Other times it will trigger when I cross and the logs show that it communicates back to change the variable, but the variable doesn't change. Two days ago, after I was already 15 minutes out from my geofence, it triggered that I left, but then immediately triggered that I entered. I was nowhere near my geofence. Probably 8 miles away. And other times it works flawlessly. It's driving me nuts. It's just as crazy on my wife's iPhone and her service provider is different so it shouldn't be the cell service. It could be that I live near a portal to hell and that is screwing with the GPS/cell. That's my only theory so far. The problems aren't consistent and I can't identify any pattern.

Any updates on the geofence not working? I've updated to the latest TestFlight version on two different iPhones but am still having numerous random geofence issues. Just wanted to see if others are still having issues or if it has become reliable for you again? I haven't submitted a ticket yet but plan on it if the issue has been resolved for others.

This update caused my Disabled programs to re-enable this time. But not last time. Didn't know this was a problem! My garage kept opening and closing repeatedly, my alarm wouldn't turn off, lights kept turning off. It was a mess for about 10+ minutes before I found all the re-enabled programs. WAF went down several notches tonight!

Awesome! No problem. I will wait until they are able to help me out. I don't want to mess anything up further. I am just happy to know we have a quick fix. UD support is awesome.

@JTsao Your commands did get the web interface working again. Thanks for that. I did a "Migrate from PG3 Backup" again. When PG3x came back on line, all node servers showed connected. But it was lying. No data is making it in IoX. If I try to restart any of the node servers, they disconnect, never to work again! I did download my logs though and am including them in my ticket to help UD troubleshoot the problem. Thanks for your help!

Chrome says, "This site can't be reached" "192.168.0.120 refused to connect. Yes, I have a DHCP IP reservation for the mac address of Polisy. I have Polisy hardwired, not using wifi. I have also checked my firewall logs and Polisy is not being blocked. I have not updated or made changes to my firewall in the last few weeks. The only thing that has changed is the migration I did for PG3x and now PG3x doesn't work. @dbuss Thanks for the info. I gave it a shot but didn't work.

I can't reach the web interface of PG3x at all. I've tried safari and chrome and they both can't connect. Chrome says it refused to connect. Safari says can't connect to server. I do have a static reservation in my firewall/router for Polisy. I am able to reach the admin console without problem. It's just the PG3x web interface that I can no longer reach. @Geddy By resets I meant power cycles/restarts. When I was able to connect to the PG3x web interface, I did try to start and stop the individual node servers. Also tried to to reinstall the node servers in current location. But nothing worked. Just wanted to post this on the forum to see if there was anything I missed before bugging the guys at UD with a ticket. But I am definitely at the point of submitting a ticket. Thanks for all the help everyone

@DennisC Yes that is what I am doing. I have the URL saved in my browser and have been using it successfully for a while now. I just double checked it and it is properly formatted.

Thanks @MrBill. I did see the other thread regarding similar issues and the migration process. I've been scouring the forums all night trying to find a solution. @DennisC - Along with my numerous restarts, I also completely pulled power last night to no avail. When I was able to get into PG3x, I tried to manually start the node servers. It would tell me they were already running. According to the log they were also running. But, the main PG3x screen would show them all offline and none of them were connected to IoX. Couldn't see any status of any node server in admin console. Unfortunately, after a few more resets, I have completely lost the ability to connect via the web interface.

Ok, I'll admit it, I had no reason to upgrade PG3 to PG3x. I was bored and saw the upgrade path was now available. So I did it and now I can't reach PG3x via the web interface and nothing is populating in IoX. I'm going to submit a ticket but hoping someone can help me solve it before I tie up the UD guys. Here's the steps I went though: - clicked https://polisy.local:8443/rest/pg3x.enable about a week ago. Had me log in and then gave me the following XML error. "This XML file does not appear to have any style information associated with it. The document tree is shown below." Nothing else was listed on the page. - Since I kept getting the error, I just ignored it. PG3 still showed as installed and was working fine. Updated Polisy to 5.6.0 on Friday. After the update, I rebooted Polisy and PG3X now shows up. - Logged in and two node servers were offline. Couldn't reboot them or do anything with them. They were just frozen. Rebooted Polisy again and now all node servers were offline. I could stop them and restart them but their status showed them all offline and they weren't reporting into IoX. Rebooted again and now I can't even get to the PG3x web interface. - SSH into Polisy. PG3x package shows 3.1.25. In services, I have a pg3 and polyglot listed. I don't see pg3x service. Anyone have any ideas what I can try next? I do have backups of everything just in case I need to do a restore. Thanks in advance for any help!

Same here on my Polisy. I have a program that turns a light on at 9PM every night and then turns it off at sunrise. It's been running fine for years. Last night, 3/12 it never turned on at 9. It says its next run time is 3/13 @ 9. Looks like time based programs took the night off on Polisy.

Argh! That was it! Thank you so much. It is odd because PG3 said it was connected and didn't give any IoP connection warnings like PG2 would. It also had the option to connect securely so I went with it. I'm just happy to have it working. Thanks again.

My credentials were already there but I entered them again and saved. Rebooted just for the heck of it. Deleted the two PG3 node servers and reinstalled the Bond node server. Still not showing up in my Polisy. I've attached the log from PG3. Let me know if you need anything else to help figure this out. I really appreciate the help. This has gone above my level of expertise. haha pg3_6-2-2022_122128_PM.zip

Good morning, I am using a polisy pro. It is on 5.4.4 and has both PG2 and PG3 installed. I am currently using all of my node servers on PG2 without any issues. Today I tried to start migrating two of my node servers to PG3. (Plex Webhooks (slot 3) and Bond (slot 4)). I deleted Plex and Bond off of PG2. I then installed them and configured them in the same slots on PG3. Both node servers connect and show multiple nodes. However, the two servers in PG3 will not install in Polisy. Slots 3 and 4 are empty. I have rebooted Polisy and also PG3. I've also deleted and reinstalled each node server. When I go into each node server and click the load profile button, I get the following error in the log. 6/2/2022, 09:27:51 [pg3] error: Error: POST https://192.168.0.120:8443/rest/ns/profile/4/upload/nls/en_US.txt Failed :: TypeError: Converting circular structure to JSON --> starting at object with constructor 'Object' | property 'httpsAgent' -> object with constructor 'Agent' | property 'sockets' -> object with constructor 'Object' | ... | property 'errored' -> object with constructor 'Object' --- property 'config' closes the circle 6/2/2022, 09:27:51 [pg3] info: upload not successful PG3 shows it is connected to Polisy. Not sure how to fix this. Any help would be greatly appreciated. Jason

@Geddy I've thought about your solution a few times. Problem is, I live in this master planned community. It's 1 mile wide by 2 miles long. When they built it, they refused to let cell companies put up towers in it to preserve its beauty or some garbage like that haha. I have to travel approximately 2 miles before my cell signal hits 2 bars. I have a program set to make sure the alarm is set, lights are out, and garage is shut once my wife's phone and my phone are both out of the geofence. I also have it only open the garage when we get close to home. I'd have to set the geofence a mile or two out which wouldn't trigger if we were at a friends house in the neighborhood or at the kid's school. I'm going to mess around with it and see if I can come up with a better solution. @Javi Thanks for the reply. Never considered the limitation of the OS. I'm hoping iOS will let the app check every few minutes until it can confirm with ISY Portal that it received the the crossing trigger. So many of us rely on geofences to make sure our homes are secure. It would be great if we had a near bulletproof solution to guarantee the crossing will be received by our ISY. I also understand that it may not be possible at all. Just wanted to throw the suggestion out there and see if you could just keep it in mind when developing that part of the app. As always, appreciate the work you have already put into the app. It's nice to finally have an app for the ISY that has lots of functionality. It was the wild west before!

Yes I am on 15.3.1. But it's still hit or miss. I've lived at my current location for just over two years and the entire time it's been spotty. Even before Apple broke geofences. Thanks for the info though. I didn't realize that Apple finally fixed it with this release.

@Javi I have one request for when you implement geofencing in UD Mobile. When the geofence is triggered upon exit or entry, can you please have the app verify that the entry in the ISY actually gets updated. Currently using locative with ISY Portal and when I cross the geofence, Locative just sends the GET request once without verifying the ISY actually received it. My cell signal is weak in my neighborhood and only has about a 60% success rate in reaching the ISY upon crossing. If there is an alternate way to make this work, I am open to suggestions! Thanks for the consideration.

So far I haven't had any major problems with this release. The only issue I have had so far is with my Yale locks. 1. The settings button disappeared which used to allow me to edit the lock settings in a nice GUI. I know I can still edit the settings using the parameters but it was a convenient feature. 2. The "User Number" box isn't populating and I have rules based on which user unlocks the door. The user number is being seen in the Event Viewer but it is not displaying in the User Number window which the rules are based off of. To try to fix this, I synchronized both locks. I also did a soft and hard reset of the ISY. I have attached a screenshot of the user number issue.

It does not work in 5.0.10. I have three of the Mimo2+ devices and they all only show up as a single relay in my ISY running 5.0.10.

That is correct. Only state variables at this time, Integer variables is empty.

Alright, here is Level 3 Event Viewer. This is the order of devices I manipulated. First I opened Mobilinc and I noticed that open failed line. Opened and closed a dimmerlinc device (dual band) Opened and closed a switchlinc device (dual band) Opened and closed outdoor module (single band) Opened and closed Garage kit i/o linc (single band) Keypadlinc to turn on and off fanlinc Let me know if you guys see anything. I have no idea how to read this. Thanks in advance!! Wed 12/16/2015 01:43:56 PM : [FileOpen ] Open failed for [/CONF/INTEGER.VAR] (r) Wed 12/16/2015 01:45:14 PM : [INST-TX-I1 ] 02 62 23 A6 E7 0F 11 FF Wed 12/16/2015 01:45:14 PM : [INST-ACK ] 02 62 23.A6.E7 0F 11 FF 06 LTONRR (FF) Wed 12/16/2015 01:45:14 PM : [INST-SRX ] 02 50 23.A6.E7 3B.94.A6 2F 11 FF LTONRR (FF) Wed 12/16/2015 01:45:14 PM : [Std-Direct Ack] 23.A6.E7-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Wed 12/16/2015 01:45:14 PM : [D2D EVENT ] Event [23 A6 E7 1] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:45:14 PM : [ 23 A6 E7 1] ST 255 Wed 12/16/2015 01:45:24 PM : [INST-TX-I1 ] 02 62 23 A6 E7 0F 13 00 Wed 12/16/2015 01:45:24 PM : [INST-ACK ] 02 62 23.A6.E7 0F 13 00 06 LTOFFRR(00) Wed 12/16/2015 01:45:25 PM : [INST-SRX ] 02 50 23.A6.E7 3B.94.A6 2F 13 00 LTOFFRR(00) Wed 12/16/2015 01:45:25 PM : [Std-Direct Ack] 23.A6.E7-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Wed 12/16/2015 01:45:25 PM : [D2D EVENT ] Event [23 A6 E7 1] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:45:25 PM : [ 23 A6 E7 1] ST 0 Wed 12/16/2015 01:45:29 PM : [INST-TX-I1 ] 02 62 22 AE 8D 0F 11 FF Wed 12/16/2015 01:45:29 PM : [INST-ACK ] 02 62 22.AE.8D 0F 11 FF 06 LTONRR (FF) Wed 12/16/2015 01:45:29 PM : [INST-SRX ] 02 50 22.AE.8D 3B.94.A6 2F 11 FF LTONRR (FF) Wed 12/16/2015 01:45:29 PM : [Std-Direct Ack] 22.AE.8D-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Wed 12/16/2015 01:45:30 PM : [D2D EVENT ] Event [22 AE 8D 1] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:45:30 PM : [ 22 AE 8D 1] ST 255 Wed 12/16/2015 01:45:34 PM : [INST-TX-I1 ] 02 62 22 AE 8D 0F 13 00 Wed 12/16/2015 01:45:34 PM : [INST-ACK ] 02 62 22.AE.8D 0F 13 00 06 LTOFFRR(00) Wed 12/16/2015 01:45:34 PM : [INST-SRX ] 02 50 22.AE.8D 3B.94.A6 2F 13 00 LTOFFRR(00) Wed 12/16/2015 01:45:34 PM : [Std-Direct Ack] 22.AE.8D-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Wed 12/16/2015 01:45:34 PM : [D2D EVENT ] Event [22 AE 8D 1] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:45:34 PM : [ 22 AE 8D 1] ST 0 Wed 12/16/2015 01:45:42 PM : [INST-TX-I1 ] 02 62 14 A3 25 0F 11 FF Wed 12/16/2015 01:45:42 PM : [INST-ACK ] 02 62 14.A3.25 0F 11 FF 06 LTONRR (FF) Wed 12/16/2015 01:45:42 PM : [INST-SRX ] 02 50 14.A3.25 3B.94.A6 2B 11 FF LTONRR (FF) Wed 12/16/2015 01:45:42 PM : [Std-Direct Ack] 14.A3.25-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:45:43 PM : [D2D EVENT ] Event [14 A3 25 1] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:45:43 PM : [ 14 A3 25 1] ST 255 Wed 12/16/2015 01:45:48 PM : [INST-TX-I1 ] 02 62 14 A3 25 0F 13 00 Wed 12/16/2015 01:45:48 PM : [INST-ACK ] 02 62 14.A3.25 0F 13 00 06 LTOFFRR(00) Wed 12/16/2015 01:45:48 PM : [INST-SRX ] 02 50 14.A3.25 3B.94.A6 2B 13 00 LTOFFRR(00) Wed 12/16/2015 01:45:48 PM : [Std-Direct Ack] 14.A3.25-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:45:48 PM : [D2D EVENT ] Event [14 A3 25 1] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:45:48 PM : [ 14 A3 25 1] ST 0 Wed 12/16/2015 01:46:25 PM : [INST-TX-I1 ] 02 62 20 F7 FE 0F 11 02 Wed 12/16/2015 01:46:25 PM : [INST-ACK ] 02 62 20.F7.FE 0F 11 02 06 LTONRR (02) Wed 12/16/2015 01:46:26 PM : [INST-SRX ] 02 50 20.F7.FE 3B.94.A6 2B 11 02 LTONRR (02) Wed 12/16/2015 01:46:26 PM : [Std-Direct Ack] 20.F7.FE-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:46:26 PM : [D2D EVENT ] Event [20 F7 FE 2] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:46:26 PM : [ 20 F7 FE 2] ST 255 Wed 12/16/2015 01:46:26 PM : [D2D-CMP 0004] STS [20 F7 FE 2] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Wed 12/16/2015 01:46:27 PM : [INST-SRX ] 02 50 20.F7.FE 00.00.01 CB 13 00 LTOFFRR(00) Wed 12/16/2015 01:46:27 PM : [Std-Group ] 20.F7.FE-->Group=1, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:46:27 PM : [D2D EVENT ] Event [20 F7 FE 1] [DOF] [0] uom=0 prec=-1 Wed 12/16/2015 01:46:27 PM : [ 20 F7 FE 1] DOF 0 Wed 12/16/2015 01:46:27 PM : [D2D EVENT ] Event [20 F7 FE 1] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:46:27 PM : [ 20 F7 FE 1] ST 0 Wed 12/16/2015 01:46:27 PM : [D2D-CMP 0009] STS [20 F7 FE 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Wed 12/16/2015 01:46:27 PM : [INST-SRX ] 02 50 20.F7.FE 13.00.01 CB 06 00 (00) Wed 12/16/2015 01:46:27 PM : [Std-Group ] 20.F7.FE-->13.00.01, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:46:27 PM : [INST-INFO ] Previous message ignored. Wed 12/16/2015 01:46:29 PM : [INST-TX-I1 ] 02 62 20 F7 FE 0F 13 02 Wed 12/16/2015 01:46:29 PM : [INST-ACK ] 02 62 20.F7.FE 0F 13 02 06 LTOFFRR(02) Wed 12/16/2015 01:46:29 PM : [INST-SRX ] 02 50 20.F7.FE 3B.94.A6 2B 13 02 LTOFFRR(02) Wed 12/16/2015 01:46:29 PM : [Std-Direct Ack] 20.F7.FE-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:46:29 PM : [D2D EVENT ] Event [20 F7 FE 2] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:46:30 PM : [ 20 F7 FE 2] ST 0 Wed 12/16/2015 01:46:30 PM : [D2D-CMP 0004] STS [20 F7 FE 2] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> false Wed 12/16/2015 01:46:46 PM : [INST-TX-I1 ] 02 62 20 F7 FE 0F 11 02 Wed 12/16/2015 01:46:46 PM : [INST-ACK ] 02 62 20.F7.FE 0F 11 02 06 LTONRR (02) Wed 12/16/2015 01:46:46 PM : [INST-SRX ] 02 50 20.F7.FE 3B.94.A6 2B 11 02 LTONRR (02) Wed 12/16/2015 01:46:46 PM : [Std-Direct Ack] 20.F7.FE-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:46:46 PM : [D2D EVENT ] Event [20 F7 FE 2] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:46:46 PM : [ 20 F7 FE 2] ST 255 Wed 12/16/2015 01:46:46 PM : [D2D-CMP 0004] STS [20 F7 FE 2] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Wed 12/16/2015 01:46:49 PM : [INST-TX-I1 ] 02 62 20 F7 FE 0F 13 02 Wed 12/16/2015 01:46:49 PM : [INST-ACK ] 02 62 20.F7.FE 0F 13 02 06 LTOFFRR(02) Wed 12/16/2015 01:46:49 PM : [INST-SRX ] 02 50 20.F7.FE 3B.94.A6 2B 13 02 LTOFFRR(02) Wed 12/16/2015 01:46:49 PM : [Std-Direct Ack] 20.F7.FE-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:46:49 PM : [D2D EVENT ] Event [20 F7 FE 2] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:46:50 PM : [ 20 F7 FE 2] ST 0 Wed 12/16/2015 01:46:50 PM : [D2D-CMP 0004] STS [20 F7 FE 2] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> false Wed 12/16/2015 01:47:00 PM : [INST-SRX ] 02 50 20.F7.FE 00.00.01 CB 11 00 LTONRR (00) Wed 12/16/2015 01:47:00 PM : [Std-Group ] 20.F7.FE-->Group=1, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:47:00 PM : [D2D EVENT ] Event [20 F7 FE 1] [DON] [0] uom=0 prec=-1 Wed 12/16/2015 01:47:00 PM : [ 20 F7 FE 1] DON 0 Wed 12/16/2015 01:47:00 PM : [D2D EVENT ] Event [20 F7 FE 1] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:47:00 PM : [ 20 F7 FE 1] ST 255 Wed 12/16/2015 01:47:00 PM : [D2D-CMP 0009] STS [20 F7 FE 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> false Wed 12/16/2015 01:47:00 PM : [INST-SRX ] 02 50 20.F7.FE 11.00.01 CB 06 00 (00) Wed 12/16/2015 01:47:00 PM : [Std-Group ] 20.F7.FE-->11.00.01, Max Hops=3, Hops Left=2 Wed 12/16/2015 01:47:00 PM : [INST-INFO ] Previous message ignored. Wed 12/16/2015 01:49:14 PM : [INST-TX-I1 ] 02 62 00 00 14 CF 11 00 Wed 12/16/2015 01:49:14 PM : [INST-ACK ] 02 62 00.00.14 CF 11 00 06 LTONRR (00) Wed 12/16/2015 01:49:14 PM : [D2D EVENT ] Event [25 6C 3C 5] [ST] [255] uom=0 prec=-1 Wed 12/16/2015 01:49:14 PM : [ 25 6C 3C 5] ST 255 Wed 12/16/2015 01:49:14 PM : [D2D EVENT ] Event [14 9F 5 2] [ST] [63] uom=0 prec=-1 Wed 12/16/2015 01:49:14 PM : [ 14 9F 5 2] ST 63 Wed 12/16/2015 01:49:18 PM : [INST-TX-I1 ] 02 62 00 00 14 CF 13 00 Wed 12/16/2015 01:49:18 PM : [INST-ACK ] 02 62 00.00.14 CF 13 00 06 LTOFFRR(00) Wed 12/16/2015 01:49:18 PM : [D2D EVENT ] Event [25 6C 3C 5] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:49:18 PM : [ 25 6C 3C 5] ST 0 Wed 12/16/2015 01:49:18 PM : [D2D EVENT ] Event [14 9F 5 2] [ST] [0] uom=0 prec=-1 Wed 12/16/2015 01:49:18 PM : [ 14 9F 5 2] ST 0