Moshe

In the Administrative Console - True In the portal - True, Under the header "Room" it is blank..

So I have disabled the Sonos skill and ISY v3 skill. Re-enabled both skills and still can not discover the SwitchLink.

I did get the message that I can close the page after I logged into the UDI portal. I need to check that the device is in the correct location in the UDI portal. I don't remember seeing this.

ScottAvery - I don't recall seeing a forget option using alexa.amazon.com I will check again. I also need to make sure pop-up blocker is off. I am using UDI's portal my.isy.io. I will try again let you know what I find. Can someone send me a screen shot of the forget option.

I do not see an option to forget devices. What do you mean by this. What I did is disabled the v2 skill and then enabled the v3 skill. I do not see any way of forgetting the devices.

I disabled v2 and enabled v3. I am still unable to discover the SwitchLink.

I added the SwitchLink to the portal. The spoken name is master bedroom. I can control the switch from the ISY. What do you mean by forget and discover in the Alexa app?

stusviews - The Sonos One is new to me. I have not been able to add any Insteon devices to the Alexa app and I am on ISY skill v.2. I figure I would start slow and then add more once I get the hang of things.

stusviews - Thanks for replying. I have both the SONOS and ISY Optimized for Smart Home V2 skill enabled. I am trying to discover the switch.

I am having an issue where I am unable to discover devices using a Sonos One. I have added one device in the ISY portal and linked "ISY Optimized for Smart Home V2" with Alexa. I have also tried V3 but I am still unable to discover the one device in the portal. Alexa Device: Sonos One Device added: SwitchLink - 2477D Spoken: master bedroom Skill: ISY Optimized for Smart Home V2" It shows online and registered in the ISY admin page. I have also removed the the ISY skill and re-enabled. Does anybody know if the Sonos one is compatiable with ISY?

Specifics: Great point. Alexa Device: Sonos One Device added: SwitchLink - 2477D Spoken: master bedroom Skill: ISY Optimized for Smart Home V2" Both show online and registered

I am having an issue where I am unable to discover devices. I have added one device in the ISY portal and linked "ISY Optimized for Smart Home V2" with Alexa. I have also tried V3 but I am still unable to discover the one device in the portal. Any suggestions?

Teken - Not sure I did not purchase it yet.

I am thinking about installing a weather station in my home and was wondering if hte ACURITE (model #: 01022M) weather station is compatible with the ISY and Insteon network. Will I be able to create programs to trigger Insteon devices to to turn off and on. Thank you

Removing Saturday fixed the issue. Thanks to all. Moshe

Paul - Why does it not continue to run on Monday, Tuesday.. Moshe

UI and firmware at 4.5.0. Bathrooms - [iD 0022][Parent 0006] If On Sat, Fri Time is 6:30:00PM Then Set Scene 'Bathrooms / Bathrooms-100%' On Wait 4 hours and 30 minutes Set Scene 'Bathrooms / Bathrooms-50%' On Wait 8 hours and 30 minutes Set Scene 'Bathrooms / Bathrooms-100%' On Wait 2 hours and 30 minutes Set Scene 'Bathrooms / Bathrooms-50%' On Wait 1 hour and 30 minutes Set Scene 'Bathrooms / Bathrooms-100%' On Wait 3 hours Set Scene 'Bathrooms / Bathrooms-50%' On Wait 4 hours Set Scene 'Bathrooms / Bathrooms-100%' On Else - No Actions - (To add one, press 'Action')

I created a program that will dim lights on certain days of the week. I removed one of the days (Sunday) but the program still dims the light on Sunday. I tried re-adding Sunday and removing it again, but the program still runs on Sunday. Any suggestions? Currently I am running version 4.5.0. Thanks Moshe

apostolakisl - I agree oberkc's post 10 seems to make the most sense. Moshe

oberkc / stusviews - Thanks so much for pointing in the right direction. I did not realize the in-scene statement would not immediately initiate the command to go to 50%. Thanks again Moshe

All - Thanks for the help. It seems I need to make a couple of scenes to make this work they I would like. oberkc - The statement that should bring the lights back to 100% is " Set Scene 'Bathrooms' On" since I could not adjust the scene "bathrooms" to 50%, I added the statements. "In Scene 'Bathrooms' Set 'Bathrooms / Downstairs Bathroom' 50% (On Level) In Scene 'Bathrooms' Set 'Bathrooms / Master Bathroom' 50% (On Level)" I thought the last two statement would bring brightness to 50%. Concerning the wait statements: The first wait statement of 4h30m should fire off first, dim to 50% and then after 8h30m brighten to 100%. I am not sure why it would wait a total of 13 hours (you are correct it did wait 13 hours) Thanks Moshe

That is what I did but it did not work. I am not sure what I am doing wrong. Moshe

Thanks stusviews and oberkc - This is what I am trying to do. I would like the bathroom lights to turn on at 6:00 PM on Fri, at 100% brightness wait a few hours and dim down to 50% brightness , again wait so many hours and brighten back to 100% and so on. I would like the lights to react immediately after the wait time. (I am trying to configure for Shabbos and Yom Tov ultimately.) Thanks Moshe

I am trying to create a single program that would dim lights to 50% and brighten back to 100% over a 2 day period. Is there a cleaner method than using the wait (I would prefer times instead of hours and minutes) command. My program is below. As an aside it did not work, but I had on Sat, and Fri in the "if" statement. Thanks Moshe Bathrooms - [iD 0022][Parent 0006] If On Fri From 6:30:00PM To 11:00:00PM (next day) Then Set Scene 'Bathrooms' On Wait 4 hours and 30 minutes In Scene 'Bathrooms' Set 'Bathrooms / Downstairs Bathroom' 50% (On Level) In Scene 'Bathrooms' Set 'Bathrooms / Master Bathroom' 50% (On Level) Wait 8 hours and 30 minutes Set Scene 'Bathrooms' On Wait 2 hours and 30 minutes In Scene 'Bathrooms' Set 'Bathrooms / Downstairs Bathroom' 50% (On Level) In Scene 'Bathrooms' Set 'Bathrooms / Master Bathroom' 50% (On Level) Wait 1 hour and 30 minutes Set Scene 'Bathrooms' On Wait 3 hours In Scene 'Bathrooms' Set 'Bathrooms / Downstairs Bathroom' 50% (On Level) In Scene 'Bathrooms' Set 'Bathrooms / Master Bathroom' 50% (On Level) Else Set Scene 'Bathrooms' Off

Does the e-mail notification only work with gmail or can I configure with my Verizon SMTP server