swbrains Posted September 23, 2013 Posted September 23, 2013 Version 3.3.10 firmware. I am moving and leaving behind my ISY-99i as part of the home automation system. I'm taking my router with me, so I disconnected the ISY from the router and now the Mem and Err lights blink in sync. If I reconnect to router, they go out. Disconnect, they start blinking again. Regardless, the home automation events/programs/triggers seem to be working correctly. From the error log: Sun 2013/09/22 10:36:14 PM System -5 Start Sun 2013/09/22 10:36:17 PM System -100 No network connection Sun 2013/09/22 10:38:46 PM System -170001 [Network] Established Sun 2013/09/22 10:42:46 PM System -5 Start Sun 2013/09/22 10:42:49 PM System -170001 [Network] Established Sun 2013/09/22 10:43:19 PM System -100 No network connection Sun 2013/09/22 10:46:24 PM System -170001 [Network] Established Sun 2013/09/22 10:47:54 PM System -5 Start Sun 2013/09/22 10:47:58 PM System -170001 [Network] Established Sun 2013/09/22 10:50:27 PM System -100 No network connection Is there some config option that I can set or unset so it doesn't *need* to have a network connection? Already disabled NTP for time sync but it didn't help. Can't see any other options that would require it to reach the internet. Thanks, -- Vinnie
Michel Kohanim Posted September 23, 2013 Posted September 23, 2013 Hi Vinnie, There's really no harm with unplugging the network jack from ISY. The mem/error just indicate that ISY is not connected to the network and that's a perfectly OK configuration as well. With kind regards, Michel
Recommended Posts