failed to add device IRLinc 2411T

[jaherrerab]

When I try to add button to IRLinc Transmiter, the 2411T is identified (in this case: f.a4.3b), but "cannot add Insteon device" message is displayed with the following event log, Could you help me? thanks:

 

ISY: ISY99i pro (1040) v.3.3.10

IRLinc: 2411T v 1.3

 

mar 10/15/2013 21:51:32 : Start Insteon Device Linking Mode

mar 10/15/2013 21:51:32 : [LNK-BGN ] 02 64 01 00 06

mar 10/15/2013 21:52:42 : [LNK-STAT ] 02 53 M(01) gid=00 0F.A4.3B 0307 49

mar 10/15/2013 21:52:42 : [0F.A4.3B 00] Linked device type=03.07 fw=49

mar 10/15/2013 21:52:42 : [F A4 3B 0 ] Added to list of devices to link to ISY

mar 10/15/2013 21:52:42 : [LNK-BGN ] 02 64 01 00 06

mar 10/15/2013 21:55:13 : Stop Insteon Device Linking Mode, Final processing to follow

mar 10/15/2013 21:55:13 : [iNST-TX-I1 ] 02 62 0F A4 3B 0F 0D 00

mar 10/15/2013 21:55:13 : [LNK-END ] 02 65 06

mar 10/15/2013 21:55:13 : [std MH ] Unexpected Ack imCmd=65 cmd1= 0x3B

mar 10/15/2013 21:55:14 : [iNST-ACK ] 02 62 0F.A4.3B 0F 0D 00 06 (00)

mar 10/15/2013 21:55:14 : [iNST-SRX ] 02 50 0F.A4.3B 25.2A.4E 2B 0D 01 (01)

mar 10/15/2013 21:55:14 : [std-Direct Ack] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

mar 10/15/2013 21:55:18 : [iNST-TX-I1 ] 02 62 0F A4 3B 0F 0D 00

mar 10/15/2013 21:55:18 : [iNST-ACK ] 02 62 0F.A4.3B 0F 0D 00 06 (00)

mar 10/15/2013 21:55:19 : [iNST-SRX ] 02 50 0F.A4.3B 25.2A.4E 2B 0D 01 (01)

mar 10/15/2013 21:55:19 : [std-Direct Ack] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

mar 10/15/2013 21:55:19 : [F A4 3B 0 ] Calibrating engine version

mar 10/15/2013 21:55:19 : [F A4 3B 0 ] May not fully support i2, reverting to i1

mar 10/15/2013 21:55:19 : [F A4 3B 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000)

mar 10/15/2013 21:55:19 : [iNST-TX-I2 ] 02 62 0F A4 3B 1F 2F 02 00 00 00 10 01 00 00 00 00 00 00 00 00 BE

mar 10/15/2013 21:55:19 : [iNST-ACK ] 02 62 0F.A4.3B 1F 2F 02 00 00 00 10 01 00 00 00 00 00 00 00 00 BE 06 (02)

mar 10/15/2013 21:55:19 : [iNST-SRX ] 02 50 0F.A4.3B 25.2A.4E 2B 2F 02 (02)

mar 10/15/2013 21:55:19 : [std-Direct Ack] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

mar 10/15/2013 21:55:20 : [iNST-ERX ] 02 51 0F A4 3B 25 2A 4E 1B 2F 01 00 01 00 10 00 00 00 00 00 00 00 00 00 00

mar 10/15/2013 21:55:20 : [Ext-Direct ] 0F.A4.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

mar 10/15/2013 21:55:20 : [F A4 3B 0 ] IRLincTX addr=0x0010 .. Read [0000000000]

mar 10/15/2013 21:55:20 : [F A4 3B 0 ] Failed to add device

mar 10/15/2013 21:55:20 : [ Time] 21:55:46 0(0)

[Michel Kohanim]

Hello jaherrerab,

 

Did you follow the instructions here?

http://wiki.universal-devices.com/index ... ransmitter

 

With kind regards,

Michel