DIYguy Posted February 23, 2014 Share Posted February 23, 2014 I'm migrating from HouseLinc to ISY and still have some bugs. I had HouseLinc active while setting up ISY but have now disconnected it. Still have some ghosts to clear up. I have an OutletLinc that is only suppose to be a responder to a garage door I/O device. Door goes up, nightlight plugged into the outlet goes on, door goes down, light goes out. Been that way for 1-1/2 years. Now in ISY when I click on the OutletLinc is show as a responder to another light switch in the garage. It is not suppose to be and I can figure out how to remove the OutletLink as a responder to the light switch. Link to comment
Michel Kohanim Posted February 23, 2014 Share Posted February 23, 2014 Hi DIYguy, If that other switch is a controller in a scene, then simply put the outletlinc in that scene as a responder and then remove it. If the other switch is not a controller in any scenes, then create scene, do the above and then remove the scene. With kind regards, Michel Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.