Princerichy Posted May 28, 2014 Share Posted May 28, 2014 I have an older 2486 KeypadLinc, 6 button. I cannot get the A - D LEDs to light via the ISY994i. Any Suggestion? I just purchased the ISY994i and so far it is great! Thanks for your help. Link to comment
Michel Kohanim Posted May 28, 2014 Share Posted May 28, 2014 Hi Princerichy, You need to put those buttons inside a scene (as responder) and then activate the scene. With kind regards, Michel Link to comment
Princerichy Posted May 28, 2014 Author Share Posted May 28, 2014 Hi Michael, I have them in various programs but not scenes. This is an example: If From Sunset -30 minutes To 11:14PM (same day) Then Set Family Room Lamp On Set Master Bathroom - C on 15 / off 0 (backlight level) Else No Actions Master Bathroom C in a 6 button KeypadLinc The Family Room lamp operates as requested but the KeyPadLinc does not Thank you for your patience! Link to comment
Xathros Posted May 28, 2014 Share Posted May 28, 2014 Princerichy- As Michel said above, secondary KPL buttons need to be placed in a scene and the scene used to turn them On/Off. Setting the backlight level (usually done on the primary node) affects the On and Off brightness levels for ALL buttons of the KPL. It does not turn on/off individual buttons - only sets the KPL's 2 brightness levels globally. -Xathros Link to comment
Princerichy Posted May 28, 2014 Author Share Posted May 28, 2014 I will set it up properly. Thank you for the enlightenment! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.