Hi

I was trying to turn on a relay using REST but couldn't find any documentation on how to turn on/off an individual relay on the EZ4O. Example would be appreciated.

Thanks Gary

The following turns On Relay 2

 

http://192.168.2.3/REST/nodes/17 6F 77 2/cmd/DON

 

turn Off relay 1

 

http://192.168.2.3/REST/nodes/17 6F 77 1/cmd/DOF

Edited December 7, 201410 yr by LeeG

Hi Lee

I had tried that but always get a 404 error. Other nodes work fine using rest but not the EZ4O.

This is my example:

(http://admin:admin@192.168.0.0:6040/rest/nodes/01 DD E5 1/cmd/DON)

 

Because what I need to do is in programs anyway I just use ..rest/programs/006E/runThen as a work around.

Thanks Gary

ISY994i/IR PRO ver 4.2.15

Edited December 7, 201410 yr by garybixler

The leading 0 in the Insteon address is likely the problem

 

http://admin:admin@1...0/rest/nodes/1 DD E5 1/cmd/DON 

 

I tested the two examples before posting.

Edited December 7, 201410 yr by LeeG

Yes, you are absolutely right. Works ok now.

Thanks Lee

You're welcome.  Thanks for posting back as the examples may help someone in the future.