JeffR Posted December 16, 2015 Posted December 16, 2015 I have a Totaline 1-day thermostat and an Insteon 2441V for about a year now. The last couple of weeks I'm seeing random heat on/off events that last only 2 minutes. The short time is because the setpoint minus dead band hasn't been met. So what is possibly causing this odd behavior: ISY994i, Thermostat, Insteon 2441V, PLM, RF noise? I copied the logfile below of the last event which just happened tonight and seems to happen at least once a day. I tried resetting the thermostat and also moved to v4.4.1 firmware but neither changed fixed anything. ISY994i Firmware v4.4.1 Insteon: 2441V Firmware v2.5 Tue 12/15/2015 07:43:34 PM : [iNST-SRX ] 02 50 14.F8.24 00.00.02 CB 11 00 LTONRR (00) Tue 12/15/2015 07:43:34 PM : [std-Group ] 14.F8.24-->Group=2, Max Hops=3, Hops Left=2 Tue 12/15/2015 07:43:34 PM : [D2D EVENT ] Event [14 F8 24 3] [DON] [0] uom=0 prec=-1 Tue 12/15/2015 07:43:34 PM : [ 14 F8 24 3] DON 0 Tue 12/15/2015 07:43:34 PM : [D2D EVENT ] Event [14 F8 24 3] [sT] [255] uom=0 prec=-1 Tue 12/15/2015 07:43:34 PM : [ 14 F8 24 3] ST 255 Tue 12/15/2015 07:43:34 PM : [D2D-CMP 000A] STS [14 F8 24 3] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Tue 12/15/2015 07:43:34 PM : [D2D EVENT ] Event [14 F8 24 1] [CLIHCS] [1] uom=0 prec=-1 Tue 12/15/2015 07:43:34 PM : [ 14 F8 24 1] CLIHCS 1 Tue 12/15/2015 07:43:34 PM : [iNST-SRX ] 02 50 14.F8.24 3C.49.C7 41 11 02 LTONRR (02) Tue 12/15/2015 07:43:34 PM : [std-Cleanup ] 14.F8.24-->ISY/PLM Group=2, Max Hops=1, Hops Left=0 Tue 12/15/2015 07:43:34 PM : [iNST-DUP ] Previous message ignored. Tue 12/15/2015 07:43:34 PM : [iNST-SRX ] 02 50 14.F8.24 3C.49.C7 46 11 02 LTONRR (02) Tue 12/15/2015 07:43:34 PM : [std-Cleanup ] 14.F8.24-->ISY/PLM Group=2, Max Hops=2, Hops Left=1 Tue 12/15/2015 07:43:34 PM : [iNST-DUP ] Previous message ignored. Tue 12/15/2015 07:45:38 PM : [iNST-SRX ] 02 50 14.F8.24 00.00.02 CB 13 00 LTOFFRR(00) Tue 12/15/2015 07:45:38 PM : [std-Group ] 14.F8.24-->Group=2, Max Hops=3, Hops Left=2 Tue 12/15/2015 07:45:38 PM : [D2D EVENT ] Event [14 F8 24 3] [DOF] [0] uom=0 prec=-1 Tue 12/15/2015 07:45:38 PM : [ 14 F8 24 3] DOF 0 Tue 12/15/2015 07:45:38 PM : [D2D EVENT ] Event [14 F8 24 3] [sT] [0] uom=0 prec=-1 Tue 12/15/2015 07:45:38 PM : [ 14 F8 24 3] ST 0 Tue 12/15/2015 07:45:38 PM : [D2D-CMP 000A] STS [14 F8 24 3] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> false Tue 12/15/2015 07:45:38 PM : [D2D EVENT ] Event [14 F8 24 1] [CLIHCS] [0] uom=0 prec=-1 Tue 12/15/2015 07:45:38 PM : [ 14 F8 24 1] CLIHCS 0 Tue 12/15/2015 07:45:38 PM : [iNST-SRX ] 02 50 14.F8.24 3C.49.C7 41 13 02 LTOFFRR(02) Tue 12/15/2015 07:45:38 PM : [std-Cleanup ] 14.F8.24-->ISY/PLM Group=2, Max Hops=1, Hops Left=0 Tue 12/15/2015 07:45:38 PM : [iNST-DUP ] Previous message ignored. Tue 12/15/2015 07:45:38 PM : [iNST-SRX ] 02 50 14.F8.24 3C.49.C7 46 13 02 LTOFFRR(02) Tue 12/15/2015 07:45:38 PM : [std-Cleanup ] 14.F8.24-->ISY/PLM Group=2, Max Hops=2, Hops Left=1 Tue 12/15/2015 07:45:38 PM : [iNST-DUP ] Previous message ignored.
Michel Kohanim Posted December 16, 2015 Posted December 16, 2015 Hi Jrissmill69, This very much sounds like the thermostat itself. Is it possible to change the dead band configuration to 3 degrees (temporarily) and see if that works? If not, then I would suggest contacting Venstar. With kind regards, Michel
JeffR Posted December 16, 2015 Author Posted December 16, 2015 Michel, Thank you. I will give it a try.
Recommended Posts