See New Device But No Device Properties/Info

[ccclapp]

Hi

 

Im sure this is user error, but...I have created one node on the Nodelink config page.  It is intended to test Nodelink as I cont have supported devices at the moment (will get GEM Ethernet module).  As such the device type is the Extra Isy Data, or whatever it was called in the dropdown (no longer there since I created one it is removed from the list).

 

I enabled sun position and Ontario Time-of Use Node (whatever that does).  I see two grouped devices on ISY Main called ISY Data and Sun Position.  However, if I select either there are no fields on the main device page.  See screenshot:

 

 

 

Here is the log from the config web page:

2016-02-15 23:38:34 - ISY NodeLink Server v0.3.5 started
2016-02-15 23:38:34 - Web config server started (http://192.168.xxx.xxx:8090)
2016-02-15 23:38:34 - ISY resolved to 192.168.xxx.xxx
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 1L)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 1R)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 2L)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 2R)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 3L)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 3R)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 4L)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (KP 4R)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (Ofc-PC-EMlZ008)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (Bmt-Theta-SSlZ020)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (Gar-Fridge-SSlZ022)
2016-02-15 23:38:36 - ISY Error: Duplicate node names exist on the ISY (Ofc-Rack-SSlZ028)
2016-02-15 23:38:36 - Auto-Update: Checking for program update...
2016-02-15 23:38:36 - Auto-Update: No web update available

Any suggestions?

 

[EDIT:  Note I am running nodelink on a RPi in a console ssh window for testing purposes (not as a service etc.  It is running)

[Edit 2: I have rebooted both ISY and RPi and loaded the zip file twice and loaded the node multiple times.]

 

Thanks

[io_guy]

Install zip and reboot again. If they don't show the basic template in the ISY it's an ISY problem.

 

There's nothing in your log.

[ccclapp]

you are correct.  A 4th reload of the zip did it. Sorry to have to ask