TJF1960 Posted November 30, 2010 Posted November 30, 2010 tim2u, I would suggest checking with a couple of WB stations in your area to see how often they update their data. All of the stations in my area only update about once an hour (1 is even longer between updates). Lee, I like that idea of the radio with the output to trigger. Do you have it set up to trigger an IO or EZIO? Was the radio very expensive? Thanks Tim
LeeG Posted November 30, 2010 Posted November 30, 2010 The Midland WR300 is <$50 from several internet sites. I've been using it for 6 months with good reception and reliable alerts. Some times to reliable alerts. My geography is such that 4 counties ( 2 in state, and 2 out of state ) have to be covered with the SAME codes. The Midland radio has an internal alarm for alerts which is loud enough to wake out of a sound sleep. I think the external alert jack is supplying 12V DC during an alert which would directly trigger any of the EZIOxx devices opto-isolated inputs. If using an I/O Linc a relay would be required between the radio and the I/O Linc. I have not found it necessary to turn on lights but I like that idea.
dvial_24 Posted December 4, 2010 Posted December 4, 2010 Hello, Can you confirm me that WB has the option to change F to Celsius ? Thank you, Denis
Illusion Posted December 4, 2010 Posted December 4, 2010 Hello, Can you confirm me that WB has the option to change F to Celsius ? Thank you, Denis Confirmed. Just did it to make sure it worked and indeed I now have readings in C
wrj0 Posted March 26, 2011 Posted March 26, 2011 Hello Mr. Giffen, As far as I can tell, the value is a number between 0 - 100 and it denotes the ambient light level. The light rate is the percentage of change in hour. With kind regards, Michel Michel, Should both the Light value and Light Rate value be shown as %/h ? Perhaps Light value is just a number and not a percentage.
Michel Kohanim Posted March 27, 2011 Posted March 27, 2011 Hello wrj0, correct! Thanks so very much and it shall be fixed in the next release. With kind regards, Michel
Mike_405 Posted April 28, 2011 Posted April 28, 2011 What is the unit of measure of light data in the weather module? OOPS. I see this was already responded to... If you look at Rand's answer 3/4/2009 there is light and light rate. The unit of measure I'm not sure but the rate tells you is it getting lighter or darker. In the morning a light amount of 58% tells you it is still getting light and it will likely get brighter if there aren't clouds in the sky. A light rate of 2.5% means it is getting 2.5% brighter every hour. The designation is light rate per hour. I've though of writing a program to turn on lights on weekends if the light rate between 9:00 am and 5:00 pm is 25% or less. something like that.
Mike_405 Posted April 28, 2011 Posted April 28, 2011 I haven't spent much time on it yet, but I signed up for weatherbug API's. I have the network module bringing the data in for Weather Alerts and when I test the network page it does bring back a response. However, I don't know how to create the e-mail to populate the data I have from Weather Alerts. Maybe Weather Alerts and Forecast could be an incremental component for Weatherbug and charge a price for this incremental service.
Michel Kohanim Posted April 28, 2011 Posted April 28, 2011 Hi Mike_405, Are you having issues with creating email notifications which include weather information? If so, everything is already there in 2.8.16. With kind regards, Michel
Mike_405 Posted April 29, 2011 Posted April 29, 2011 Hi Mike_405, Are you having issues with creating email notifications which include weather information? If so, everything is already there in 2.8.16. With kind regards, Michel Hello Michel, I have 3.1.2. I have the networking and weatherbug modules. Also, I wrote an e-mail that is delivered at 3:55PM with the current weather conditions at home before I hit the train. I wrote a networking program that brings in the weatherbug alerts webpage. I just need to get that data into a notification. It's a work in process. Not sure if it can be done.
Michel Kohanim Posted April 30, 2011 Posted April 30, 2011 Hello Mike_405, You won't be able to use the network module to "retrieve" and parse information (unfortunately). With kind regards, Michel
vislman Posted May 17, 2011 Posted May 17, 2011 I'm planning to purchase the Weatherbug module for irrigation. But Weatherbug stations in my area (Saanichton, BC, Canada) are very rare... There is one station called "Victoria (Hartland)", and I followed the reported weather through the web interface and various browser plugins. I never see any rain reported by this station - daily or monthly rainfall is always 0, even though we had lots of rain during the last weeks. If there is no local station reporting rainfall, I really don't want to purchase the Weatherbug module... But maybe the missing rain is some limitation in the web interface? How can I find out if the ISY Weatherbug module would show me any valid precipitation for my area ?
Michel Kohanim Posted May 18, 2011 Posted May 18, 2011 Hello vislman, If you do not see rain rate and rain today values in the station's main page for WeatherBug, then, in all likelihood, that station does not provide that information and hence WB would be quite useless. You can always try WB module for 30 days and then return it if it does not meet your needs. With kind regards, Michel
evilpete Posted May 25, 2011 Posted May 25, 2011 What is the unit of measure of light data in the weather module? I am wondering the same..
Michel Kohanim Posted May 26, 2011 Posted May 26, 2011 So am I! I would've assumed it's lumen or lux but there are no other indications from which we can deduce what it is. With kind regards, Michel
evilpete Posted May 26, 2011 Posted May 26, 2011 So am I! I would've assumed it's lumen or lux but there are no other indications from which we can deduce what it is. With kind regards, Michel if it was lux you should get a reading of approx one lux or so on a clear night with a full moon.
wrj0 Posted May 26, 2011 Posted May 26, 2011 From: http://weather.weatherbug.com/weatherbu ... er-station Light Intensity: Range: 0 - 100%, Accuracy: +/- n/a
starmanj Posted October 15, 2011 Posted October 15, 2011 wrjo, how did you enable the irrigation module? It doesn't show up in my Weatherbug screen-- Starmanj
wrj0 Posted October 15, 2011 Posted October 15, 2011 Starmanj, You'll need to purchase the Irrigation Module. Once you do, it will show in your Climate Tab. From the ISY Admin Console: Help | Purchase Modules | Irrigation Module
starmanj Posted October 15, 2011 Posted October 15, 2011 I just purchased it but it still doesn't show up. I have latest non-beta firmware 2.8.16; it says I need 3.14-- so I need to install beta firmware?
Michel Kohanim Posted October 16, 2011 Posted October 16, 2011 Hello starmanj, You need to upgrade to 3.1.9 and then send your uuid to support@universal-devices.com and we'll reactivate it for you. With kind regards, Michel
tim2u Posted December 6, 2011 Posted December 6, 2011 From a post I saw earlier it looks like I can do things as the following (excuse syntax): If Module.Weather.HighTemp>100 then ... If Module.Weather.CurrentTemp >30 and <50 then ... Is this correct? I also saw that I had a 30 period I could return it if not able to meet my wants. Thanks in advance.
Michel Kohanim Posted December 6, 2011 Posted December 6, 2011 Hi tim2u, Yes, indeed. With kind regards, Michel
Recommended Posts